Chief Manufacturing CTA-2536 Contents, Inspect the Unit Before Installing

Installation Instructions CTA-2536

CONTENTS
PARTS	2
INSPECT THE UNIT BEFORE INSTALLING	3
TOOLS REQUIRED FOR INSTALLATION	3
INSTRUCTIONS	4
Determine a Suitable Mounting Location	4
Installing the Wall Plate	4
Attaching Wall Arm to Wall Plate	5
Attaching Front Cover	5
Connecting NPT Pipe or Nipple to Wall Arm	5

INSPECT THE UNIT BEFORE INSTALLING

Unpack the carton. Carefully inspect the parts for shipping damage. Verify contents listed in Table 1.

If you are missing any of the listed parts, contact Customer Service at: 1-800/582-6480.300.

Table 1. Shipping Contents

ITEM	DESCRIPTION	QTY
10	Wall Plate	1
20	5/16 X 2.5” Lag Bolt	6
30	5/16 Flat Washer	6
40	M8 Flat Washer	6
50	M8 Lock Washer	6
60	M8 X 16mm Button Head Cap Screw	6
70	M5 Allen Key	1

TOOLS REQUIRED FOR

INSTALLATION

The tools required for installation are as follows:

•Electric drill and bit set

•Stud sensor (mechanical or electronic)

•½” box-end wrench or ratchet with ½” socket

•13mm box-end wrench or ratchet with 13mm socket

•Level

NOTE: Other tools may be required depending on your method of installation.

3