Specifications
Power Supply |
|
Current Draw | <120mA |
Detecting Distance | 0ft – 4.5ft |
Sensor Cable Length | 18ft |
Operating Temperature Range | |
Maintenance |
|
Though your backup system requires minimum care, you should maintain its condition and performance using the following the guidelines:
•Keep the control box away from moisture, extreme heat or cold.
•Keep the sensors free from snow, ice, and debris.
Diagnostics / Trouble Shooting
Problem |
| Solution |
No sound when reverse | 1. | Check if ignition/reverse light on |
gear is engaged. | 2. | Check power cable connection |
| 3. | Check switch on speaker |
1 Beep | System is functioning correctly | |
2 Beeps | 1 sensor is disconnected/damaged | |
3 Beeps | ||
4 Beeps | No sensors are connected | |
System beeping without | 1. | Ensure sensor is mounted upright. |
obstacle behind vehicle | 2. | Remove anything mounted on the vehicle |
|
| that may be in the detection area. |
| 3. | Ensure correct hole size has been drilled in |
|
| bumper. |
| 4. | Verify sensor is installed at the correct |
|
| height. |
| 5. | Verify sensor is in the correct position. |
| 6. | Check all connections. |
| 7. | Ensure module is not mounted near |
|
| electrical components with high current. |
| 8. | Verify supporter was used if required |
|
| (angled/metal bumpers). |
|
|
|
3