Mounting and Installation (continued)
DIN rail mounting (using ZS-33-R)
•The tightening toque for DIN rail mounting screws and joint screws should be 0.4 
0.05N·m.
Through hole
Bracket
Joint screw
DIN rail mounting bracket
DIN rail mounting screw
Note) Not applicable if the thread type is F02.
Piping
•Keep the tightening torque when piping for the female thread. •Refer to the following table for the appropriate torque values.
Nominal size of | Appropriate torque |
screws | N·m |
Rc1/8 | 7 to 9 |
|
|
Rc1/4 | 12 to 14 |
|
|
•Hold the metal part with the spanner when piping.
•For
it is not pulled off. •Insertion with excess force
lead to cause breakage. •Ensure no leakage after piping.
•Use this flow sensor within the specified
operating pressure range and operating temperature range. •Withstand pressure are 1.0MPa.
12 | 13 |