Emerson CF770BC01 Unpacking Instructions, Tools Needed for Assembly, Up to 50 ft 50-100 ft

Page 3

This Manual Is Designed to Make it as Easy as

Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One Phillips head screwdriver

One stepladder

One 1/4” blade screwdriver

One wire stripper

One 5/16” open end wrench, or pliers

Three wire connectors (supplied).

MATERIALS

Wiring outlet box and box connectors must be of type required by the local code. The minimum wire would be a 3-conductor (2-wire with ground) of following size

:

Installed Wire Length

Wire Size A.W.G.

Up to 50 ft.

14

50-100 ft.

12

!WARNING

Before assembly your ceiling fan, refer to section on proper method of wiring your fan (page 6). If you feel you do not have enough wiring knowledge or experi- ence, have your fan installed by a licensed electrician.

Unpacking Instructions

For your convenience, check-off boxes are provided next to each step. As each step is com- pleted, place a check mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should you be interrupted.

!WARNING

Do not install or use fan if any part is damaged or missing. Call Toll-Free:

1-800-654-3545

!WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson could result in personal injury or property damage.

1.Check to see that you have received the following parts:

NOTE: If you are uncertain of part description, refer to exploded view illustration.

a.Fan motor assembly

b.One switch housing assembly

c.Five fan blades

d.One ceiling cover

e.Five blade flanges

f.One hanger ball/downrod assembly

g.One hanger bracket

h.One coupling cover

i.One loose parts bag containing:

1.Sixteen 3/16-24 x 1/4” slotted Phillips washer head blade screws

2.Eleven 1/4-20 x 1/2” Phillips oval head flange screws

3.One wood ball

4.Three wire connectors

5.Two threaded studs

6.Two lockwashers

7.Two knurled knobs

8.One clevis pin

9.One hairpin clip

10.One coupling

11.Sixteen blade washers

NOTE: Place the parts from the loose parts bags in a small container to keep them from being lost. If any parts are missing, contact your local retailer or catalog outlet for replacement before proceeding.

2.Remove the fan assembly from the protective plastic bag. Place the fan assembly into the upper foam pad with the top of the motor facing up.

The upper foam pad serves as a holder for the fan during the first stages of assembly.

FAN BLADES

UPPER

FOAM PAD

PROTECTIVE

FAN MOTOR

PLASTIC BAG

ASSEMBLY

 

BLADE

 

FLANGES

 

HANGER

SWITCH

BRACKET

HOUSING

CEILING

ASSEMBLY

COVER

 

HANGER BALL/

 

DOWNROD ASSEMBLY

 

LOOSE PARTS

 

BAG

 

COUPLING

 

COVER

CARTON

LOWER

FOAM PAD

3

Image 3
Contents Model No MontereySafety Instructions Additional Safety Instructions for InstallationDate Code Tools Needed for Assembly Unpacking InstructionsUp to 50 ft 50-100 ft How to Put Your Ceiling Fan Together Installed as described above, or fan wobble couldResult Electrical Requirements How to Wire Your Ceiling Fan How to Hang Your Ceiling FanTHREE-SPEED Using Your Ceiling FanMaintenance AccessoriesTrouble Shooting Repair Parts ListingHOW to Order Repair Parts

CF770ORB01, CF770AW01, CF770WW01, CF770BC01, CF770OB01 specifications

The Emerson CF770 series ceiling fans, including the CF770AW01, CF770OB01, CF770TG01, CF770BC01, and CF770WW01 models, are designed to provide both aesthetic appeal and functional airflow solutions for various living spaces. These fans combine contemporary design with advanced technology to enhance comfort and interior decor.

One of the standout features of the CF770 series is its sleek, modern design, available in a variety of finishes including Antique White (AW), Oil Rubbed Bronze (OB), Titanium Gray (TG), Black (BC), and Glossy White (WW). This versatility allows homeowners to select a model that complements their home’s style, whether traditional or modern.

The fans are equipped with a powerful yet quiet motor that ensures efficient airflow without the disruptive noise often associated with ceiling fans. With a 52-inch blade span, these ceiling fans are ideal for medium to large-sized rooms, providing optimal circulation.

The CF770 series also features an integrated LED light kit, providing energy-efficient lighting that enhances the ambiance of any room. The LED lights offer multiple color temperature options, allowing users to customize their lighting experience according to their preferences and needs.

Installation of these fans is user-friendly, thanks to their universal mounting system, making them suitable for both flush mount and angled ceilings. Additionally, the fans come with an easy-to-use remote control, providing effortless operation from anywhere in the room.

The blade design of the CF770 series enhances air movement, ensuring improved comfort during warmer months, while also helping to circulate heat during colder seasons. This year-round functionality ensures that these fans not only provide aesthetic value but also contribute to energy efficiency in the home.

Safety features such as the high-quality blades that are sturdy and well-balanced ensure durability and longevity. The fans are also compliant with strict safety standards, making them a reliable choice for any household.

In summary, the Emerson CF770 series ceiling fans are a perfect blend of style, functionality, and efficiency. With their modern designs, powerful motors, integrated LED lighting, and user-friendly features, they represent an excellent choice for enhancing the comfort and ambiance of any space.