Niles Audio manual Using the WS100R with the Intellipad Ci system, Tab Down

W A L L - M O U N T I N F R A R E D S E N S O R

2.Hold the WS100R as shown in (Figure 3). Locate the two plastic mounting tabs at the top rear of the Decora-style insert. Using two fingers, simultaneously press both tabs down (towards the center of the insert) and forward (away from you) until the insert pops free from its mounting slots.

3.Locate the new Decora-style insert. Hold the WS100R so that it is facing you. Insert the two bottom tabs into the bottom slots first, followed by the two tabs on the top. Snap the insert into place by carefully pressing on the front of the insert.

Using the WS100R with the Intellipad Ci system.

The WS100R is fully compatible with the Niles Intellipad Ci line, follow the wiring instructions in Figure 4. For specific informa- tion see your Intellipad Ci manual.

Tab

Down

5 = STATUS	1	= 12V
3 = GROUND	2	= DATA

1 = Green/White - 12V

2 = Green - DATA

3 = Orange/White - GROUND

4 = Blue - EMPTY

5 = Blue/White - STATUS

6 = Orange - EMPTY

7 = Brown/White - EMPTY

8 = Brown - EMPTY

Figure 4

1 = STATUS 2 = DATA

3 = GROUND

4 = 12V DC

This color code is based on the industry standard T568A coding for the RJ45 connector. When connecting the WS100R to the Niles Ci system observe this Pin configuration.

8