OS136 Series Miniature
CAUTION & SAFETY INFORMATION
If the equipment is used in a manner not specified in this manual, the protection provided by the equipment may be impaired.
The Installation category is one (1).
There is no user replaceable fuse in this product.
The output terminals of this product are for use with equipment (Digital meters, chart recorders, etc.) which have no accessible live parts. Such equipment should comply with all the applicable safety requirements.
Do not operate the equipment in flammable or explosive environments.
The unit comes with a 1.82 m (6') shielded cable for power and output connections. The cable is a
Power must be disconnected before making any electrical connections.
The recommended power supply should be VDE or UL approved.
The supply voltage to the transmitter should not exceed 24 VDC.
SAFETY WARNINGS AND IEC SYMBOLS
This device is marked with international safety and hazardous symbols in accordance with IEC1010. It is important to read and follow all the precautions and instructions in this manual before operating or commissioning this device as it contains important information relating to safety and EMC. Failure to follow all the safety precautions may result in injury and/or damage to your equipment.
IEC Symbol | Description | |
|
| Caution - Refer to the accompanying |
|
| document(s). |
|
| Direct Current |
|
| |
|
| |
Laser Symbol
iii