General Maintenance

905067 - 03-21-02.qxd 4/3/02 8:18 AM Page 7

KEEP TOOL CLEAN

All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could very possibly dissolve or otherwise damage the material.

FAILURE TO START

Should your laser level fail to operate, make sure batteries are charged and properly installed.

BATTERY

The batteries will discharge if stored for long periods of time, and may require replacement before use.

SERVICE AND REPAIRS

All quality tools will eventually require servicing or replacement of parts due to wear from normal use. These operations, should ONLY be performed by either an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER-CABLE • DELTA FACTORY SERVICE CENTER. All repairs made by these agencies are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by anyone other than these agencies.

Should you have any questions about your laser level, feel free to write us at any time. In any communications, please give all information shown on the nameplate of your laser level (model number, type, serial number, etc.).

ACCESSORIES

A complete line of accessories is available from your Porter-Cable Supplier, Porter-Cable • Delta Factory Service Centers, and Porter- Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier.

WARNING: Since accessories other than those offered by Porter- Cable have not been tested with this product use of such accessories could be hazardous. For safest operation, only Porter- Cable recommended accessories should be used with this product.