Team Products PMD8131, PMD8129 Screwdriver Operation, Maintenance, Specifications for PMD8127

Page 5

12V, 14.4V, 18V Cordless Drills

Your drill comes with an automatic braking function that quickly stops the chuck from turning when the trigger switch is released.

Your drill (models PMD8131 and PMD8133) has two speed ranges; low speed (position 1) (0-400 rpm) and high speed (position 2 ) (0-1100 rpm).

Screwdriver Operation

Place the point of the screwdriver bit into the head of the screw and apply slight pressure to the tool. Press the trigger switch slightly and then gradually increase the drill speed. Release the trigger switch as soon as the clutch engages.

Note: Starting the drill at too high of a speed can damage the drill bit or reduce the life of the bit.

Make sure that the driver bit is inserted straight in the screw head or the screw may become damaged or will not be inserted properly. When driving wood screws, pre-drill pilot holes into the surface to make driving easier.This will also prevent the wood from splitting.

Note: When drilling, the drill bit can become stuck. If this happens, a very high torque will be produced. Always take care to hold the drill firmly to prevent possible damage or injury.

Maintenance

Clean the Drill regularly. Before cleaning, remove the battery pack and any accessories (bits etc.).To clean, use ONLY a mild soap and damp cloth on the housing. Never immerse drill in any kind of fluid. Do not use any solvents or harsh abrasives on the drill housing as this may cause damage to the unit. Always keep the ventilation openings clear.

NOTE: All bearings in these tools are lubricated with a sufficient amount of high-grade lubricant for the life of the unit under normal operating conditions. No further lubrications required.

CAUTION: DO NOT keep the trigger switch pressed in with tape or any other permanent means or the circuit will not function properly. A malfunction may result, possibly causing overheating or damage to the unit.

Do not open the drill, battery or battery charger.There are no user serviceable parts. Opening the unit will void the warranty.

7

Owner’s Manual

TROUBLESHOOTING TIPS:

DRILL DOES NOT WORK?

• Recharge the battery

CHARGING INDICATOR LED NOT ILLUMINATED DURING RECHARGING?

•Check that battery pack is properly connected to the battery charger

•Check that the AC Adaptor is properly connected at both ends

SPECIFICATIONS for PMD8127

Voltage

12V

Speed 1

0-600RPM

Torque Settings

24 + Drill

Chuck Capacity

up to 3/8”

Charger Input

120V AC 60Hz

ChargingTime

Approx. 3 –8 Hours

BatteryType

Ni-Cad

SPECIFICATIONS for PMD8128

Voltage

14.4V

Speed 1

0-600RPM

Torque Settings

24 + Drill

Chuck Capacity

up to 3/8”

Charger Input

120V AC 60Hz

ChargingTime

Approx. 3 –8 Hours

BatteryType

Ni-Cad

8

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 12V, 14.4V, 18V Cordless Drills Keep hands clear of moving parts WelcomeKeep work area well lit Keep out of reach of children Accessories Recommended size of Extension Cord for Battery ChargerControls and Components Batteries and AC Charger DrillUsing The Drill Instructions for USE Charging The BatterySpecifications for PMD8127 MaintenanceSpecifications for PMD8128 Screwdriver OperationQuestions? Specifications for PMD8129Specifications for PMD8131 and PMD8133

PMD8127, PMD8129, PMD8133, PMD8128, PMD8131 specifications

The Team Products lineup, featuring models PMD8128, PMD8133, PMD8129, PMD8127, and PMD8131, offers a wide range of devices tailored for varied applications, each with unique features that cater to different user needs. These models are engineered using advanced technologies that ensure high performance and reliability.

The PMD8128 model is well-known for its robust design and versatility. It incorporates high-speed processing technology, enabling efficient handling of demanding tasks. It features a sleek interface that simplifies user interactions, making it suitable for both beginners and experienced users. With a durable build, this device can easily withstand tough environments without compromising on performance.

In contrast, the PMD8133 focuses on connectivity, offering multiple ports for seamless integration with other devices. Its advanced networking capabilities ensure that users can easily share data and resources across various platforms. The PMD8133 also boasts enhanced security features, providing peace of mind for users who prioritize data protection.

The PMD8129 stands out with its energy-efficient design, optimizing power consumption without sacrificing performance. This model is perfect for users looking to minimize their environmental footprint while still achieving optimal results. Additionally, its lightweight construction makes it highly portable, allowing users to carry it for on-the-go tasks.

For those seeking enhanced performance, the PMD8127 offers high processing power combined with a user-friendly interface. This model is designed for multitasking, allowing users to handle multiple applications seamlessly. With a premium display and superior sound quality, the PMD8127 is ideal for both work and entertainment.

Finally, the PMD8131 combines innovation and functionality, equipped with state-of-the-art technologies that enhance user experience. It features smart features like voice recognition and touch controls, making operations intuitive and engaging. The PMD8131 excels in both performance and aesthetics, making it a top choice for users who value style alongside functionality.

Together, these models from Team Products represent a blend of advanced technology, user-centric design, and reliable performance. Whether users require high processing speed, connectivity options, energy efficiency, multitasking capabilities, or innovative features, there is a model listed that meets their specific needs, ensuring satisfaction across diverse use cases.
Top Page Image Contents