Leica 762767-R, 772789-R Check and Adjust, Using rechargeable NiMH batteries, Later recharging

Page 14

 

battery compartment. The plus contact is rounded and

 

raised. When replacing batteries, change both at the

EN

same time.

 

X Replace the compartment and tighten with a coin or

 

screwdriver.

Using rechargeable NiMH batteries

If your laser has a rechargeable battery, you must charge it for 8 hours before first using the laser.

XInsert the charger plug into the jack located at the back of the laser, under the wall mount.

XPlug the charger into an electrical outlet.

XCharge for 8 hours.

Later recharging

The laser can be charged while working if electricity is available on the jobsite. Simply plug in the charger and keep on working.

You can also remove the battery pack to charge it, or replace it with the alkaline battery compartment to keep on working.

Check and Adjust

Notes and Responsibilities

•It is the responsibility of the user to follow operating instructions and to periodically check the accuracy of the instrument and work as it progresses.

•The laser is adjusted to the defined accuracy specifi- cations at the factory. It is recommended to check

your laser for accuracy upon receipt and periodically thereafter to ensure accuracy is maintained. If your laser requires adjustment, contact the nearest autho- rized service center or adjust the laser using the following procedure.

•Do not enter this mode or attempt adjustment unless you plan to change the accuracy. Accuracy adjust- ment should only be performed by a qualified indi- vidual that understands basic adjustment principles.

Checking level accuracy

To check the level accuracy of your laser, place the unit on a flat, level surface or tripod approximately 30 meters (100 ft.) from a wall. See illustration {L} in the back, inside cover of this manual.

XAlign the X-axis so that it is square to the wall. Allow the laser to self-level completely (approximately one minute after the laser begins to rotate). Then mark the position of the beam (Position 1).

XRotate the laser 180°, allow it to self level and mark the opposite side of the first axis (Position 2).

XAlign the Y-axis by rotating the laser 90° so that this axis is now square to the wall. Allow the laser to self- level completely, and then mark the position of the beam (Position 3). See illustration {M} in the back, inside cover of this manual.

XRotate the laser 180°, allow it to self level and mark the opposite side of the Y-axis (Position 4).

XThe laser is within its accuracy specification if the four marks are within ± 3 mm (± 1/8") from the center.

Check and Adjust

11

Roteo 20HV/25H/35/35G - 1.2.0en

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Roteo 20HV/25H/35/35G Roteo 35/35G Roteo 25H Roteo 20HV Axis Introduction IntroductionContents Laser Overview a How to use your RoteoBasic Operation Carrying Case Overview CButton Functions Automatic / Manual modesScanning mode Roteo 20HV/35/35G Alert modeRotation mode Roteo 20HV/35/35G Set-up for manual slopes Set-up and applicationsWall Mount D Roteo 20HV/35/35G Motorized Wall Mount Roteo 35/35GSet-up for inclined planes Roteo 20HV/35/ 35G Set-up for full manual modeSet-up for semi-automatic mode Set-up for ceiling work Set-up for layout or floor work Roteo 20HV/35/35GRRC-350 Receiver/Remote Control AccessoriesRC-350 Remote Control AccessoriesBatteries Other accessoriesLow battery Indicator Replacing alkaline batteriesCheck and Adjust Check and AdjustUsing rechargeable NiMH batteries Later rechargingChecking vertical accuracy AxisAdjusting vertical accuracy The Z-axis Check your workSymptom Possible Causes and Solutions TroubleshootingTroubleshooting Troubleshooting Storage Care and TransportTransport Care and TransportSafety Directions Safety DirectionsCleaning and Drying GeneralHazards of Use Limits of UseResponsibilities EnvironmentPrecautions Do not use the product in a thunderstormSafety Directions Roteo 20HV/25H/35/35G Laser ClassificationGeneral Class 3R laser productsLaser Aperture Description ValueLabelling, Laser Class 3R Roteo 20HV/25H/35 Laser beam Plumb beam Roteo 20HV/25H/35/35G 1.2.0enElectromagnetic Compatibility EMC Labelling, Laser Class 3R Roteo 35GFCC Statement, Applicable in U.S Labeling Roteo Laser Notice No.50, dated July 26Technical Data Technical DataInternational Limited Warranty International Limited WarrantyGeosystems AG, Heerbrugg Switzerland Copyright Leica

772789-R, 6007285, 762767-R, 6007282, 798056 specifications

Leica has long been synonymous with precision engineering and exceptional optical performance, and the models 798056, 6007282, 762767-R, 6007285, and 772789-R are no exception. These high-quality instruments cater to a variety of professional needs, delivering outstanding results in both photography and imaging.

The model 798056 features a robust construction that is resistant to harsh environmental conditions, making it ideal for fieldwork. With its advanced autofocus system, it ensures that users can capture sharp, detailed images quickly and accurately. The optical design incorporates cutting-edge lens elements that minimize distortion and enhance image clarity.

Model 6007282 is notable for incorporating modern digital technologies. This model integrates Wi-Fi connectivity, allowing users to transfer images seamlessly to smartphones or computers. Its intuitive user interface makes navigating features quick and efficient, while the high-resolution sensor captures stunning details in both bright and low-light conditions.

The 762767-R model prioritizes versatility, combining features suited for both casual and professional photographers. It boasts a modular design that allows users to interchange lenses based on their specific needs, whether shooting wide landscapes or close-up portraits. The built-in image stabilization system helps eliminate blur, ensuring that every shot is crisp and clear.

Equally impressive is the model 6007285, known for its exceptional low-light performance. With advanced noise reduction technology, it captures stunning images in challenging lighting situations, making it a preferred choice for night photography and indoor events. The ergonomic grip and thoughtfully designed controls enhance the shooting experience, allowing for comfort during extended use.

Lastly, the 772789-R model stands out for its exceptional build quality and sophisticated aesthetic. This camera integrates enriched color grading capabilities that appeal to photographers who prioritize post-production. Its long battery life ensures that users won't miss a moment, even on the longest shoots.

In summary, Leica's models 798056, 6007282, 762767-R, 6007285, and 772789-R offer a robust combination of innovative technologies, precision optics, and user-friendly features. These instruments are designed not only to meet the demands of professional users but also to inspire creativity and facilitate exceptional image capture in diverse conditions. Whether documenting personal memories or crafting professional projects, these Leica models are reliable tools that deliver exceptional results.
Top Page Image Contents