HANDS-FREE Operation, Using the BUILT-IN Stand

3.OPERATION:

The Spotlight can be operated with or without the battery installed. Operation from external 12 volt DC source with at least 10 amps capacity will allow lamp operation and internal battery charge.

SPOTLIGHT – Using the locking trigger switch:

•The trigger switch is located on the front of the pistol-grip handle of the spotlight (See Figure 1)

•To turn the Spotlight 2.25 ON, squeeze the trigger switch

•To turn the Spotlight 2.25 OFF, release the trigger switch

•To lock the trigger switch into the ON position for continuous operation, squeeze the trigger switch and firmly slide the trigger locking button (see Figure 1); the spotlight will stay on until the lock is released

AREA UTILITY LIGHT

•Will provide 14 hours of continuous utility lighting - THE AREA UTILITY LIGHT is ideal for roadside repairs, as a flashlight, for work areas, for use as a campsite area light, for power outages, etc

•The ON/OFF button for the area light is located near the bottom of the handle, on the left side (see Figure 1 & 3)

•To turn the area light ON, press the button

•To turn the area light OFF, press the button

NOTE The area light switch also turns on the Battery Status Panel LEDs. Recharge when just the red LED is lit.

4.HANDS-FREE OPERATION:

USING THE BUILT-IN HANGING LANYARD:

The lanyard may be used to hang the spotlight from a branch, hook or other convenient object. Adjust the slide on the cords to keep the lanyard secure around the supporting object.

USING THE BUILT-IN STAND:

•Lift and rotate the stand to desired angle

•Turn the spotlight upside-down, and rest it on the stand (see Figure 3)

•The spotlight and/or area utility light may now be used hands-free

•For hand-held operation, simply fold the stand into the storage postion

FIGURE 3

AREA UTILITY

LIGHT SWITCH

UTILITY WORK

STAND