Specifications, Safe Battery Disposal | Husky HSK140HD instruction

7.Replace handle and recharge port assemblies in one half of the housing body. Make sure wires and connectors do not touch.

8.Place other half of housing body into position and replace three Phillips screws (clockwise). Do not overtighten.

9.Follow steps 14 through 20 for bulb replacement to reassemble reflector, rubber “O” ring, glass, retaining ring and rubber bezel. Charge the new battery using AC Recharge Adapter for a minimum of 12 hours initially, then seven hours thereafter.

SAFE BATTERY DISPOSAL

Contains a maintenance-free, sealed, non-spillable, lead acid battery, which must be disposed of properly. Recycling is required, contact your local authority for information. Failure to comply with local, state and federal regulations can result in fines, or imprisonment.

Battery Disposal Warnings:

•Do not dispose of the battery in fire as this may result in an explosion.

•Before disposing of the battery, protect exposed terminals with heavy-duty electrical tape to prevent shorting (shorting can result in injury or fire).

•Do not expose battery to fire or intense heat as it may explode.

•For more information on recycling this battery, call toll-free (877) 288-7722.

RECYCLE NON- SPILLABLE LEAD ACID BATTERY

6.SPECIFICATIONS

Spotlight Bulb	6 volt, H3 series
Battery	Maintenance free, sealed lead acid, 6 volt, 6 Amp Hour
Weight	3 lbs 2 oz (1.5 kg)
Length	8.5 in (21.6 cm)
Width	6.0 in (15.3 cm)
Height (folded)	6.5 in. (16.5 cm)