Sears 9-29013, 9-29012 owner manual One of the handle retaining screws, Guard Installation Steps

Page 9

Guard Installation Steps

1. Remove existing table boards. Keep all

screws, nuts and washers, including the lev- elling screws in the center of the front table. Discard the old table boards but keep the fence.

2o 40" TABLE ONLY (if you have the 44" table, skip to next step):

-Remove the table support channels, keeping the screws, nuts and washers° Discard the old channels.

-Install the new support channels.

-Referring to your saw owners manual, level the channels and tighten them in

place.

Install the tee nut into the front table board.

Refering to your saw owners manua!, install and level the table boards.

3.44" TABLE ONLY (if you have the 40"

table, skip to next step):

Position the flont table and insert the front two screws. The rear screw holes

in the table do not line up on any holes in the saw base,

Using the rear screw holes as a drill guide, drill a .5/16" hole in the saw base for each of the two rear screws.

Remove the front table.

The U-Clips that were used as nuts for the rear screws must be moved to the new screw location° Remove them from the saw and reinstall them on the holes you .just drilled,

Install the tee nut into the front table board.

Referring to your saw owners manual, install and level the table boards.

4, The saw's crosscut travel may no Ionger be square. Referring to your saw owners manual, square the crosscut tlavel.

.5. Remove the existing guard and blade. Rotate the saw to the outrip position.

6, Elevate and rotate the saw to the 45 degree bevel position, Remove and discard

Assembly

Note: This retro fit guard kit requires addi- tional clearance behhM fence, New table boards are being supplied for this reason,

Handle

Retaining

Screw

C

c

C

.... I [-]

one of the handle retaining screws,

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 113.197210 113.197110113.197410, 113.197411 113.197510 113.197180Table of Contents Safety Kickback Hazard Wrong Way Feed HazardWrong Way Feed Safety Workpiece Safety Instructions Saw Safety InstructionsUse only blades marked for at least Blade Safety InstructionsAssembly One of the handle retaining screws Guard Installation StepsLTighten guard clamp screw Lock motor at 0 bevel blade verticalLower arm until blade just clears table Align Riving Knife to BladeInsert into on-off switch Yellow Key Bevel Lock Turns motor on!offFence Changing Not Illustrated Tuna clockwise to tighten, coun- terclockwise to loosen Table Clamp Thumbscrew Leg Set Model Saw Handle FunctionLoosen to align riving knife, then tighten ControlsRiving Knife Pawls!Riving Knife KnobPage Catalog 9-29012 Parts List Craftsman 10 Radial SAW Guard KITEl=l= Guard For in-homemajor brand repair service For the repair or replacement parts you need

9-29012, 9-29013 specifications

Sears 9-29013 and 9-29012 are notable models among the classic tools and appliances offered by Sears, reflecting the company’s rich history in providing customers with quality products. Although these models may not be widely recognized today, they embody the craftsmanship and innovative features that have made Sears a reliable name in the industry.

One of the main attractions of the Sears 9-29013 and 9-29012 is their design, which blends functionality with user-friendly features. Both models are equipped with ergonomic handles that offer a comfortable grip, making them suitable for prolonged use. The lightweight construction ensures ease of handling and maneuverability, whether for professional tasks or home use.

In terms of technologies, these models incorporate advanced mechanisms that enhance their performance and efficiency. The precision engineering evident in the design allows for accurate measurements or effective operation, depending on the specific tool or appliance. This reliability makes them a popular choice among DIY enthusiasts and professionals alike.

The Sears 9-29013 and 9-29012 come with several interchangeable components, allowing users to customize their experience according to different tasks or projects. This versatility not only increases their appeal but also maximizes their value for budget-conscious consumers seeking multifunctional products.

Another critical feature of these models is their durability. Made from high-quality materials, they are built to withstand rigorous use in various environments. The robust construction ensures that they can handle demanding tasks without compromising on performance, providing peace of mind to users who depend on them for heavy-duty operations.

In addition to durability, these models are designed with safety in mind. Many of their features include safety mechanisms that prevent accidental operation, which is paramount for users who are both experienced and novice. This emphasis on safety further enhances their reputation as trustworthy tools for everyday use.

In summary, the Sears 9-29013 and 9-29012 exemplify quality, innovation, and user-centric design in the realm of tools and appliances. With their ergonomic features, advanced technologies, versatile components, and a strong focus on safety and durability, they continue to stand out as reliable options for various tasks, embodying the enduring legacy of Sears as a provider of dependable products.
Top Page Image Contents