Before Using Your Battery Charger
It is important to prepare your charger for use. This section will tell you how to assemble the charger, ground and connect the power cord, and prepare to charge a battery.
Assembling your charger
It is important to fully assemble your charger before use. Follow these instructions for easy assembly.
PARTS: | TOOLS NEEDED: |
Two | 3/8" wrench |
screws | (for mounting foot) |
Two | 5/16" wrench |
screws | (for wheels) |
Two wheels | Hammer |
One axle | Phillips screwdriver |
Two axle caps |
|
Two axle brackets |
|
One handle |
|
One mounting foot |
|
|
|
To attach the axle assembly:
1.Remove charger from packing materials and place upside down on a flat surface. Attach mounting foot and secure with the two
2.Hold axle upright on floor or work surface. Then, using a hammer, tap one of the plastic hubs onto the top end of the axle. Be sure to tap the hub on straight. Slide both wheels onto the axle with the hubs facing inward.
continued on next page
4
Sears 006 - Sch 552 11/2/95