Sears 200.71201 Important Safety Instructions, Help us help you, Personal Safety Precautions

Page 3

Important Safety Instructions

w

– SAVE THESE INSTRUCTIONS –

 

To reduce the risk of explosion, explosive gases, or injury while

▲! WARNING

 

 

using your battery charger, follow the precautions listed below:

•Read all instructions and cautions printed on the battery charger, battery, and vehicle or equipment using battery.

•Use charger only on lead-acidtype rechargeable batteries, such as those used in cars, trucks, trac- tors, airplanes, vans, RV’s, trolling motors, etc.

This charger is not intended to supply power to a low voltage electrical system other than in an automotive application.

•Use only attachments recommended or sold by manufacturer. The use of attachments not recom- mended by the manufacturer may result in fire, electric shock, or injury.

•Do not disassemble charger. Take it to a qualified service professional if service or repair is required. Incorrect assembly may result in fire or electrical shock.

•To reduce risk of electrical shock, unplug the charger from the outlet before attempting any maintenance or cleaning.

•Always charge battery in a well ventilated area.

Help us help you

Remember:

•Place charger as far away from battery being charged as the charger cables will permit.

•Do not expose charger to rain or snow.

•Never charge a frozen battery. If battery fluid (electro- lyte) becomes frozen, bring battery into a warm area to thaw before you begin charging.

•Never allow battery acid to drip on charger when reading specific gravity or filling battery.

•Never set a battery on top of the charger.

•Never place charger directly above battery being charged. The gases from the battery will corrode and damage the charger.

•Never use charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause personal injury.

Personal Safety Precautions

For your own personal safety, please follow the follow- ing precautions:

•Wear complete eye and clothing protection when working with lead-acid batteries.

•Be sure that someone is within range of your voice to come to your aid if needed while you work with or are near a lead-acid battery.

•Have plenty of fresh water and soap nearby for use in case battery acid contacts your eyes, skin, or cloth- ing. If this happens, wash immediately with soap and water. Then get medical attention.

•Avoid touching your eyes while working with a battery. Acid particles (corrosion) may get into your eyes. If this occurs, flush eyes immediately with running cold water for at least ten minutes. Then immediately get medical attention.

•Never touch the battery clamps together when the charger is energized.

•Never operate charger if it has received a hard blow, been dropped, or otherwise damaged. Take it to a qualified professional for inspection and repair.

•Be sure to position the charger power cord to prevent it from being stepped on, tripped over, or damaged.

•Never pull out the plug by the cord when unplug- ging the charger. Pulling on the cord may cause damage to the cord or the plug.

•Do not operate the charger if it has a damaged power cord or plug. Have the cord replaced.

•Remove all personal metal items from your body, such as rings, bracelets, necklaces, and watches while working with a lead-acid battery. A battery can produce a short circuit current high enough to weld a ring (or the like) to metal, causing a severe burn.

•Take care not to drop any metal tool or metal object onto the battery. This may spark or short circuit the battery or another electrical device that may cause an explosion.

•Always operate your battery charger in an open, well ventilated area.

•Never smoke or allow a spark or flame in the vicinity of the battery or engine. Batteries generate explosive gases.

•Neutralize any acid spills thoroughly with baking soda before attempting to clean up.

2

Sears 201- Sch 506 1/9/98

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Manual Battery Charger Warranty Table Of ContentsImportant Safety Instructions Personal Safety PrecautionsHelp us help you Parts Wiring diagramBeforeUsingYourBatteryCharger Using an extension cordPlugging it Preparing your battery to be charged Charging a battery in the vehicle Using Your Battery ChargerSetting the Controls Charging Your BatteryNegative NEG, N Charging your battery outside the vehicleCalculating charge time Hydrometer or Electronic MethodSpecific Percent Gravity Charge Charge Needed Maintenance and care Problem Possible Cause SOLUTION/REASONS TroubleshootingSEARS-64

200.71201 specifications

The Sears 200.71201, often recognized for its robust design and multifunctional capabilities, is a versatile device that appeals to a wide range of users from DIY enthusiasts to professional craftsmen. This high-performance tool combines modern technologies with user-friendly features, making it an ideal addition to any workshop or home maintenance arsenal.

One of the standout features of the Sears 200.71201 is its powerful motor, which delivers a consistent and reliable performance. The motor is designed to handle a variety of tasks, whether it's for drilling holes, driving screws, or other related applications. With adjustable speed settings, users can easily manage the tool's velocity, providing precise control according to the task at hand. This adaptability is especially beneficial for projects that require delicate handling or heavy-duty performance.

The ergonomic design of the Sears 200.71201 enhances its usability, allowing for prolonged operation without discomfort. The handle is constructed with a soft-grip material that reduces vibrations, providing a secure hold and greater accuracy. Additionally, the tool's lightweight nature ensures it can be maneuvered easily, even in tight spaces.

Another significant aspect of the Sears 200.71201 is its compatibility with a wide range of accessories. It supports various drill bits and attachments, allowing users to tackle different materials such as wood, metal, and plastic. This versatility extends its functionality, enabling users to accomplish multiple tasks with a single device.

Safety is also a key consideration in the design of the Sears 200.71201. It includes built-in features such as a protective switch and overload protection, which help prevent accidents and damage to the tool and work materials. Users can operate the device with confidence, knowing that it is equipped to handle demanding tasks without compromising on safety.

In summary, the Sears 200.71201 stands out due to its powerful motor, adjustable speed settings, ergonomic design, and compatibility with various accessories. These features make it an indispensable tool for anyone looking to enhance their DIY projects or professional work. Its emphasis on usability and safety further solidifies its reputation as a reliable addition to any toolkit, ensuring users can complete their tasks efficiently and effectively.
Top Page Image Contents