Important Safety Instructions, Help us help you

Important Safety Instructions

w	– SAVE THESE INSTRUCTIONS –
		To reduce the risk of explosion, explosive gases, or injury while
▲! WARNING
		using your battery charger, follow the precautions listed below:

•Read all instructions and cautions printed on the battery charger, battery, and vehicle or equipment using battery.

•Use charger only on lead-acidtype re- chargeable batteries, such as those used in cars, trucks, tractors, airplanes, vans, RV’s, trolling motors, etc. This charger is not in- tended to supply power to a low voltage electrical system other than in an automotive application.

•Use only attachments recommended or sold by manufacturer. The use of attachments not recommended by the manufacturer may result in fire, electric shock, or injury.

•Do not disassemble charger. Take it to a qualified service professional if service or repair is required. Incorrect assembly may result in fire or electrical shock.

•To reduce risk of electrical shock, unplug the charger from the outlet before attempting any maintenance or cleaning.

•Always charge battery in a well ventilated area.

Help us help you

Remember:

•Place charger as far away from battery being charged as the charger cables will permit.

•Do not expose charger to rain or snow.

•Never charge a frozen battery. If battery fluid (electrolyte) becomes frozen, bring battery into a warm area to thaw before you begin charging.

•Never allow battery acid to drip on charger when reading specific gravity or filling battery.

•Never set a battery on top of the charger.

•Never place charger directly above battery being charged. The gases from the battery will corrode and damage the charger.

•Never use charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause personal injury.

•Never touch the battery clamps together when the charger is energized.

•Never operate charger if it has received a hard blow, been dropped, or otherwise damaged. Take it to a qualified professional for inspection and repair.

•Be sure to position the charger power cord to prevent it from being stepped on, tripped over, or damaged.

•Never pull out the plug by the cord when unplug- ging the charger. Pulling on the cord may cause damage to the cord or the plug.

•Do not operate the charger if it has a damaged power cord or plug. Have the cord replaced.

Personal Safety Precautions

For your own personal safety, please follow the following precautions:

•Wear complete eye and clothing protection when working with lead-acid batteries.

•Be sure that someone is within range of your voice

to come to your aid if needed while you work with or are near a lead-acid battery.

•Have plenty of fresh water and soap nearby for use in case battery acid contacts your eyes, skin, or cloth-ing. If this happens, wash immediately with soap and water. Then get medical attention.

•Avoid touching your eyes while working with a battery. Acid particles (corrosion) may get into your eyes. If this occurs, flush eyes immediately with running cold water for at least 10 minutes. Then immediately get medical attention.

•Remove all personal metal items from your body, such as rings, bracelets, necklaces, and watches while working with a lead-acid battery. A battery can produce a short circuit current high enough to weld a ring (or the like) to metal, causing a severe burn.

•Take care not to drop any metal tool or metal object onto the battery. This may spark or short circuit the battery or another electrical device that may cause an explosion.

•Always operate your battery charger in an open, well ventilated area.

•Never smoke or allow a spark or flame in the vicinity of the battery or engine. Batteries generate explosive gases.

•Neutralize any acid spills thoroughly with baking soda before attempting to clean up.

Sears 210 - Sch 50911/13/95

200.71210 specifications

The Sears 200.71210 is a versatile and powerful tool designed for a variety of home and professional tasks, particularly in the realm of electrical and electronic repair. Its standout features and innovative technologies make it a preferred choice among DIY enthusiasts and professionals alike.

One of the main characteristics of the Sears 200.71210 is its ergonomic design, which ensures user comfort during prolonged use. The tool is lightweight yet durable, allowing for easy handling while maintaining the necessary strength to perform demanding tasks. The grip is thoughtfully constructed to prevent slippage, which enhances precision and control when working in tight or awkward spaces.

Equipped with a robust digital display, the Sears 200.71210 provides users with clear and accurate readings, promoting efficiency and reducing the margin for error. This feature is particularly invaluable when measuring voltage, current, and resistance, as accurate readings can be the difference between a successful repair and prolonged troubleshooting.

The Sears 200.71210 also includes a range of advanced technologies designed to enhance its functionality. One of the most notable is its auto-ranging capability, which automatically adjusts measurement scales based on the detected values, saving users the hassle of manually selecting the correct range. This feature makes it suitable for both beginners and seasoned professionals, as it simplifies the measurement process.

Additionally, this tool boasts a variety of measurement functions. It can handle AC and DC voltage measurements, current measurements, resistance checks, and even continuity tests. This multifunctionality makes it an invaluable asset for a diverse array of projects, from household electrical repairs to more complex electronic diagnostics.

Safety is another critical aspect of the Sears 200.71210. It is designed with built-in protective features to prevent overloads, ensuring the longevity of the tool while safeguarding the user. The device typically incorporates a fuse that protects sensitive components from spikes in voltage, making it a reliable option in various working conditions.

In summary, the Sears 200.71210 stands out for its ergonomic design, advanced digital display, auto-ranging capabilities, multifunctionality, and safety features. Whether tackling home improvement projects or professional electrical work, the Sears 200.71210 provides the reliability and efficiency that users expect from a trusted brand.