Sears 919.1652 specifications Parts Manual

PARTS

MANUAL

MODEL NO.

919.165200

IMPORTANT:

Read the Safety Guidelines and

All Instructions Carefully Before

Operating.

PERMANENTLY LUBRICATED AIR COMPRESSOR

SPECIFICATION CHART

Model No.	919.165200
Horsepower	5
Displacement CFM	11.9
Bore	2 3/8"
Stroke	1.35"
Voltage-Single Phase	120/240
Minimum Branch Circuit Requirement	*15 amps
**Fuse Type	Time Delay
Air Tank Capacity - GAL.	20 gal. ASME
Approximate Cut-in Pressure	100
Approximate Cut-out Pressure	130
SCFM @ 40 psig	9.1
SCFM @ 90 psig	7.1

These compressors have a dual voltage motor, 120 and 240 volt. They are wired for 120 volt but can be converted to 240 volt operation. Instructions for connecting the motor operation at 240 volt can be obtained by ordering Kit #K-0191-1.

When converting to 240 volt operation, the attached three-prong 120 volt plug must be replaced with the three-prong 240 volt plug, which is included in K-0191-1. The K-0191-1 Kit may be ordered from Sears.

*These compressors can be operated on a 15 amp circuit if:

1.Voltage supply to circuit is normal.

2.Circuit is not used to supply any other electrical needs (lights, appliances, etc.)

3.Extension cords comply with specifications in owners manual.

4.Circuit is equipped with 15 amp circuit breaker or 15 amp time delay fuse.

If any of the above conditions can not be met, or if operation of the compressor repeatedly causes interruption of the power, it may be necessary to operate it from a 20 amp circuit. It is not necessary to change the cord set.

**A circuit breaker is preferred. Use only a fuse or circuit breaker that is the same rating as the branch circuit the air compressor is operated on. If the air compres- sor is connected to a circuit protected by fuses, use dual element time delay fuses.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

M-165200 Rev. 3/28/97