Separate parts A, B, C, D as shown in the figure
Place guide (A) on the inside part of the furniture door, in the upper and lower position as shown in the figure and mark the position of external holes. Having drilled the holes, fix the guide with the screws supplied.
Fix cover (C) on guide (A) until it clips into place.
Open the appliance door and the furniture door at 90°. Insert the small square (B) into guide (A). Put together the appliance door and the furniture door and mark the holes as indicated in the figure. Remove the squares and drill holes with ø 2 mm at 8
mmfrom the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied.
A | B |
C |
|
| D |
PR266 |
|
50mm | A |
PR166 |
|
| A |
C |
|
PR33 |
|
| 8mm |
| A |
PR167 | B |
|
18