Cobra Electronics CPI 880 owner manual Installation Requirements

Page 5
On/OffSwitchto Off
ConnectTerminals
ConnectPower Source

Quick Evaluation

Before Installation

Introduction

To check your inverter’sperformancebefore installation:

1. Turn the inverter off (see page 11 for details). If the power source is a DC power supply, switch it off as well.

Installation

Requirements

Installation

InstallationRequirements

The inverter must be installed in an area that meets all of the following requirements:

A. Dry

Do not place in an area where water can drip

On/OffSwitchto On

2.Connect cables to power input terminals (see page 7 for details).

3.Connect cables to power source (see page 7 for details).

4.Check to make sure all connections are secure.

5.Turn the inverter on. If the power source is a DC power supply, switch it on first.

6.Plug in the test load.

The inverter should supply power to the load. If the inverter is not working properly, refer to the troubleshooting guide on page 14 or power and protection indicators section on page 12.

or splash on the inverter.

B. Cool

Ambient air temperature should be between 30°F

and 105°F (0°C and 40°C). The cooler the better.

C. Ventilate

Allow at least one inch (three cm) of clearance around

the inverter for proper airflow. Make sure that ventilation

openings on the ends of the unit are not obstructed.

D. Safe

Do not install the inverter in the same compartment

as a battery or in any compartment that contains

flammable liquids such as gasoline.

E. Close to Battery

Install unit as close to battery as possible (without

being in the same compartment) to minimize the

length of cable required to connect the inverter to

the battery. It is better and cheaper to run longer

AC wires than longer DC wires (cables).

Connect Test Load

USB Connection

CAUTION To avoid fire, do not cover or obstruct ventilationopenings. Do not install inverter in a zero- clearance compartment. Overheating may result.

CAUTION The inverter must only be connected to batteries with a nominal output voltage of 12 volts. It will not work with a 6 volt battery, and will be damaged if it is connected to a 16 volt battery.

WARNING This unit contains components which can produce arcs or sparks. To prevent fire or explosion,do not installin compartmentscontaining a battery or flammable materials, or in a location which requires ignition protected equipment.

 

 

Nothing Comes Close to a Cobra® 5

4

Image 5
Contents Cobra line of quality products includes HowYourCobra PowerInverterWorksOur Thanks to You Hours a day, 7 days a week 773-889-3087 phoneMaintenance Product Service Product FeaturesContents GeneralPrecautions Important Safety InformationImportantSafety Information Cobra 800Watt OutputWaveform Quick Evaluation Before InstallationQuick EvaluationBefore Installation Installation Requirements Only use the cables providedwith your power inverter Connecting CablesMounting To mount your inverterConnect cable to the power source Amperesfor 20 hours beforeit is completelydischarged Power ConsumptionPower Consumption PowerOutput Green Light Power and Protection Indicators Operating LimitsRed Light and/or Alarm InputVoltageSpecifications Troubleshooting GuideTroubleshootingGuide SolutionLimitedTwo-YearWarranty Warranty and Trademark AcknowledgementFor ProductsPurchasedin the U.S.A TrademarkAcknowledgement

CPI 880 specifications

Cobra Electronics CPI 880 is a highly regarded power inverter designed to meet the growing demand for reliable mobile power solutions. With its robust features, it allows users to convert 12V DC power from a vehicle's battery into 120V AC power, enabling the operation of a wide range of devices. This compact inverter is particularly popular among outdoor enthusiasts, campers, and professionals who require portable power on the go.

One of the standout features of the CPI 880 is its power output. With a peak power of 880 watts and a continuous output of 400 watts, it can easily handle various electronics, such as laptops, mobile devices, small appliances, and even power tools when necessary. The inverter includes multiple AC outlets, which allows users to power multiple devices simultaneously, enhancing usability and convenience.

To safeguard against potential electrical issues, the CPI 880 is equipped with several protection mechanisms. These include overload protection, short-circuit protection, and over-temperature shutdown, ensuring the safety of both the inverter and the devices it powers. The built-in cooling fan operates quietly and efficiently, dissipating heat and maintaining optimal performance during extended use.

Cobra Electronics has incorporated advanced technologies into the CPI 880 to improve its efficiency and longevity. The inverter features a modified sine wave output, which is sufficient for many electronic devices. However, users with sensitive electronics should note that pure sine wave inverters provide cleaner power and are often recommended for more delicate equipment.

Portability is another crucial aspect of the CPI 880. The durable design, combined with lightweight materials, makes it easy to transport and store. It's particularly beneficial for campers and road trippers who need a dependable power source for a variety of scenarios.

In addition to its functionality, the CPI 880 is user-friendly, featuring an easy-to-read LED display that indicates power status and battery level. This gives users another layer of awareness, preventing accidental battery depletion.

Overall, the Cobra Electronics CPI 880 stands out as a versatile and powerful inverter solution. Its combination of efficient power conversion, safety features, and portability makes it an excellent choice for anyone in need of reliable power on the move. Whether for work or leisure, this inverter meets the demands of modern mobile lifestyles effectively.