Installation Requirements

On/Off Switch to Off

Connect Terminals

Connect Power Source

10273_CPI875_PH2 7/10/07 6:04 PM Page 4

Quick Evaluation

Before Installation

Introduction

To check your inverter’s performance before installation:

1. Turn the inverter off (see page 11 for details). If the power source is a DC power supply, switch it off as well.

Installation

Requirements

Installation

•

The inverter must be installed in an area that meets all of the following requirements:

A. Dry

Do not place in an area where water can drip

On/Off Switch to On

2.Connect cables to power input terminals (see page 7 for details).

3.Connect cables to power source (see page 7 for details).

4.Check to make sure all connections are secure.

5.Turn the inverter on. If the power source is a DC power supply, switch it on first.

6.Plug in the test load.

The inverter should supply power to the load. If the inverter is not working properly, refer to the troubleshooting guide on page 14 or power and protection indicators section on page 12.

or splash on the inverter.

B. Cool

Ambient air temperature should be between 30°F

and 105°F (0°C and 40°C). The cooler the better.

C. Ventilate

Allow at least one inch (three cm) of clearance around

the inverter for proper airflow. Make sure that ventilation

openings on the ends of the unit are not obstructed.

D. Safe

Do not install the inverter in the same compartment

as a battery or in any compartment that contains

flammable liquids such as gasoline.

E. Close to Battery

Install unit as close to battery as possible (without

being in the same compartment) to minimize the

length of cable required to connect the inverter to

the battery. It is better and cheaper to run longer

AC wires than longer DC wires (cables).

Connect Test Load

USB Connection

CAUTION To avoid fire, do not cover or obstruct ventilation openings. Do not install inverter in a zero- clearance compartment. Overheating may result.

CAUTION The inverter must only be connected to batteries with a nominal output voltage of 12 volts. It will not work with a 6 volt battery, and will be damaged if it is connected to a 16 volt battery.

WARNING This unit contains components which can produce arcs or sparks. To prevent fire or explosion, do not install in compartments containing a battery or flammable materials, or in a location which requires ignition protected equipment.

		Nothing Comes Close to a Cobra® 5
4

CPI 875 specifications

The Cobra Electronics CPI 875 is a distinguished power inverter designed to convert DC power to AC power, making it an invaluable tool for both recreational and emergency use. This compact inverter delivers 875 watts of continuous power and is capable of handling peak loads of up to 1750 watts. This attribute makes it suitable for powering essential devices such as laptops, smartphones, small appliances, and even small tools.

One of the remarkable features of the CPI 875 is its user-friendly design. The inverter is equipped with an easy-to-read LED display that provides vital information about battery voltage and output wattage. This helps users monitor power consumption in real-time, ensuring that devices do not exceed the inverter’s capabilities. Additionally, the CPI 875 comes with built-in protections against overloads, overheating, and short circuits, providing peace of mind during operation.

The inverter uses advanced technology to ensure efficient power conversion. Its modified sine wave output is effective for running most electronics and appliances, though it is crucial for users to verify compatibility with sensitive devices. The compact size and lightweight design of the CPI 875 mean it can be easily transported in vehicles or stored conveniently at home.

Another key characteristic is its versatility. The CPI 875 features dual AC outlets, enabling users to power multiple devices simultaneously. Moreover, it includes a built-in USB port for charging smartphones and tablets directly, enhancing its functionality in today’s tech-driven world.

The CPI 875 operates quietly and has a reputation for reliability, making it an ideal power solution for camping trips, RV use, or as a backup power source during outages. Its durable and rugged construction ensures that it can withstand the rigors of outdoor environments, making it a favored choice among outdoor enthusiasts.

In conclusion, the Cobra Electronics CPI 875 power inverter stands out due to its impressive power output, advanced safety features, user-friendly design, and versatility. Whether you’re on the road, enjoying the great outdoors, or preparing for unforeseen power outages, the CPI 875 is a reliable and efficient choice for all your power needs.