Apple aix appletalk services technical specifications Processor, Memory, Disk drives

Page 2

Updated Technical Specifications in Setting Up the Network Server

Processor

mPowerPC604 processor at 132 or 150 megahertz (MHz) or PowerPC 604e at 200 MHz

m32 kilobytes (K) of on-chip cache with the PowerPC 604 processor,

or 64 kilobytes (K) of on-chip cache with the PowerPC 604e processor

Memory

mA minimum of 32 megabytes (MB) of 60 nanosecond (ns) parity DRAM, expandable to a maximum of 512 MB through 8 DIMM sockets

m4 MB read-only memory (ROM)

m8K of nonvolatile parameter memory

m512K of static RAM used as a Level 2 cache for the PowerPC processor on the 500 model; 1 MB on the 700 model

Disk drives

mApple SuperDrive 1.4 MB high-density floppy disk drive

mOptional internal Apple SCSI-2 Fast/Wide hard disk drive

mInternal 5.25-inch CD-ROM player

mOptional internal 3.5-inch DDS-2 DAT drive

mOptional internal 8 mm 20/40 GB tape drive

mUp to nine half-height or smaller SCSI devices (seven on the 500 model) may be connected internally (seven drives through the front drive bays, and on the 700 model, two drives in the rear-mounted internal bracket)

Full-height devices can be accommodated by using two of the front drive bays.

2

Image 2
Contents Update to AIX, AppleTalk Services, and the Network Server Disk drives ProcessorMemory Monitors InterfacesClock/Calendar Power supplyLine input KeyboardMouse Dram configurationsPower requirements Apple Desktop BusSize and weight Expansion cards and devicesUpdated hardware support Additional safety informationAdditional troubleshooting Information EthernetHard Disk Drives Memory UpgradesAvailable Peripherals Tape DrivesNetwork Cards OtherPage Apple Computer, Inc. All rights reserved