TRENDnet 1000 Base-SX/LX manual Hardware Installation, Installing two stand alone Fiber Converters

Page 4

2. Hardware Installation

Installing two stand alone Fiber Converters

1.Connect the fiber cable to the fiber converters. This cable must be multi-mode for the TFC-1000MSC. This cable must be single-mode for the TFC-1000S20/S50/S70/S10D3/ S10D5.

2.Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber converters to an Ethernet port on your switch (e.g TEG-S160TX or TEG-S240TX).

3.Connect the power adapter to the back of the fiber converter.

Note: The TX and RX cables must be reverse on the opposite fiber connection.

Note: The TFC-1000S10D3 must be paired with the TFC-1000S10D5.

2

English

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 1000Base-SX/LX Fiber Converters Table of Contents System Requirements Before You StartProduct Detail Hardware Installation Installing two stand alone Fiber ConvertersInstalling Media Converter in a Chassis Specifications DIP SwitchesOrdering Information Media ConvertersTroubleshooting Limited Warranty Fiber Converters 5 Year WarrantyPage Certifications AdvertenciaProduct Warranty Registration
Top Page Image Contents