TRENDnet TEW-435BRM manual Hardware Installation

2.Hardware Installation

1.Attach the mounting stand to the side of the unit.

2.Connect one end of the yellow RJ- 45 cable to one of the TEW-435BRM's LAN ports. Connect the other end of cable to the computer's Ethernet port. Then connect the 2dBi detachable antenna.

3.Connect one end of the gray RJ-11 cable to the TEW-435BRM's ADSL

port. Connect the other end of the cable to the phone jack.

4.Connect the AC Power Adapter to the TEW-435BRM and then to a power outlet.

5.Verify that the following panel lights are on: Power, LAN, and WLAN.

3

English