TRENDnet TEW-687GA manual Configuration is now complete

Page 11

4.Within 60 seconds press and hold the WPS

button on the TEW-687GA for 2 seconds. The WPS button will start to blink.

5.Once the WPS button becomes steady blue (approximately within 120 seconds), the TEW-687GA has been successfully configured.

6.Connect one end of a network cable to the TEW-687GA's LAN port. Connect the other end of the network cable to your media device or game console's network port. Verify that the panel lights are on: Power (Blue/Solid), Network Port (1-4) (Blue/Blinking), and Wireless (Blue/Blinking).

7.Verify that your media device or game console is connected to your network. If the network setting on your game console or media device is set to obtain an IP address automatically (dynamic IP) an IP address will be assigned automatically. Please refer to the manual or contact your media device or game console's technical support for instructions.

Configuration is now complete.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents TEW-687GA Table of Contents Before You Start Package ContentsConnect the Power Adapter to the TEW-687GA Hardware InstallationPower, Network Port, and Wireless Click Next Configure the TEW-687GAAdministration Ž Wizard if the Wizard does Click Scan Page Click Exit Wizard Wi-Fi Protected Setup WPS Push Button Setup Configuration is now complete Obtain an IP address automatically Windows Vista TroubleshootingWindows Windows XP/2000 Do I need a gaming console in order to use this device? Change the channel Wireless TipsAssign your network a unique Ssid Do not turn off the Ssid broadcastPage Page Page Page Page Copyright 2011, All Rights Reserved. TRENDnet
Top Page Image Contents