Component/RGB to Composite/S-Video

Models 1361 & 1362

Product Focus

Video Convertors/Scalers — solutions for mixed signal distribution systems

1361 FEATURES:

•Selectable PC or HDTV Inputs

•NTSC or PAL Outputs, Composite, S-Video or Component

•Supports PC Inputs up to UXGA (1600x1200@60Hz)

•Supports HDTV inputs up to 1080i

•Loop thru outputs - Both PC and HDTV

•Adjustable image scaling: Pan, Position and Zoom

•Aspect Ratio adjustment

•Remote Control with On Screen Display

Model 1361:

Many satellite receivers and cable boxes do not offer simultaneous output on YPbPr and composite outputs. To distribute the same signal to TVs with HD component inputs as well as TVs with composite or S-Video inputs, a quality down-converter is required. The Model 1361 converts an HD component or PC video signal to standard analog NTSC or PAL video. Output is either composite and S-Video or standard definition component (YCbCr) format, with a simultaneous HD pass-thru. The Model 1361 settings

are controlled via front panel push-button, an IR remote or an RS-232 interface and its over-scan feature allows you to fill the entire video screen.

1362 FEATURES:

•Composite video, S-Video or YPbPr inputs to PC/HD outputs

•PC resolutions to 1280x1024

•All HDTV progressive scan resolutions

•32Mb frame memory

•Integral picture adjustments

•Onscreen display for setup and adjustment

Model 1362:

Composite/S-Video to Component/RGB

Some high definition signal distribution systems include one or more standard definition sources. To distribute these signals to HDTVs, a quality scaler is required. Audio Authority’s Model 1362 scaler converts a standard analog NTSC or PAL video signal to high definition component video (YPbPr). Input may be either composite, S-Video, standard definition component (YCbCr), or RGsB format. Output may be YPbPr or RGBHV. Simply connect

a source and display, then select the easy-to-use onscreen menus for setup and adjustments.