Kramer Electronics 482xl user manual Adjusting the Audio Output Level

Figure 2: Connecting the 482xl Bidirectional Audio Transcoder

4.1 Adjusting the Audio Output Level

The 482xl Bi-directional Audio Transcoder comes factory pre-set for 1:1

transparency.

Readjusting the 482xl Bi-directional Audio Transcoder upsets this transparency. However, if necessary, you can fine-tune both channels’ audio output levels.

To adjust the appropriate audio output levels:

1.Insert a screwdriver into one of the four small holes on the lower side of the 482xl Bi-directional Audio Transcoder, enabling access to the appropriate trimmer.

2.Carefully rotate the screwdriver, adjusting the appropriate audio output level, as required.

482xl - Connecting the 482xl 7