Nortel Networks T1 manual Default Settings

Page 12

Step 3a – Connect a computer or smartphone via wireless

Using your wireless device, scan the wireless networks in your area and select the network called NetComm Wireless, then click connect. When the security prompt enter the security key a1b2c3d4e5

Step 3b – Connect a computer via Ethernet

Press the Reset button on the Router and connect one end of the Ethernet cable to the WAN/LAN Port on the back panel of the 3G Travel Router t1, and the other end to the RJ45 Ethernet port of the laptop or desktop PC you would like to use.

Default Settings

LAN (Management)

Static IP Address: 192.168.20.1

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.20.1

WAN (Internet)

WAN mode: DHCP

Wireless

SSID: NetComm Wireless

Channel: 11

Security: WPA-PSK

TKIP Key: a1b2c3d4e5

Modem Access

Username: admin

Password: admin

3G Travel Router t1 User Guide	ymYMLt1T �WN
12	www.netcomm.com.au

Image 12

Contents 3G Travel Router t1 Important Safety Instructions Save Our EnvironmentTable of Contents Introduction Package Contents Key FeaturesYour 3G Travel Router t1 Placement of Your t1 Location, Location, LocationRouter Placement Avoid obstacles and interferenceChoose the Quietest Channel for your Wireless Network Cordless PhonesGetting Started LED Indicators of the 3G Travel Router t1 Connectors and Buttons of the 3G Travel Router t1Connecting your device to the Router Network and System RequirementsModem Requirements Default Settings Configuring your Router and setting up your computer Windows Vista computersWindows XP computers Mac OSXSetting up your 3G Travel Router t1 Using the Router with a 3G Mobile Broadband Internet Service3G Internet Settings 3G Connection StatusAdvanced Features Login Procedure StatusEthernet Port Status Internet Settings Name Description‘Disconnect’ button is pressed Pptp LAN Advanced Routing Dhcp ClientAdvanced Routing Static Advanced Routing DynamicWireless Settings Basic Radio On/OffAdvanced Fragment ThresholdSecurity Mode SecurityWPA-PSK/WPA2 WPS Station ListFirewall Basic Settings Name Description MAC/IP/Port FilteringPort Forwarding DMZContent Filtering System SecurityAdministration Management Upload FirmwareSetting Manager StatisticsSystem Log Troubleshooting You’re Hopefully Never Going To Need This SectionWhy your wireless client can not access the Internet? Why does your wireless connection keep dropping?Cannot establish a wireless connection? What you can do when your 3G Router has no power Can not remember your encryption key. What should you do?Establishing your wireless connection Time To Introduce Me To Your FriendsWindows XP service pack NetComm Liberty Series 3G Travel Router t1 Mac OSX Windows Vista How to configure WEP/WPA-PSK/WPA2-PSK Wireless Security NetComm Liberty Series 3G Travel Router t1 Appendix Legal & Regulatory Information Customer InformationProduct Warranty Federal Communication Commission Interference StatementLimitations of Warranty GNU General Public LicenseProduct Warranty Technical Support