Milan Technology T1E1-CF-01(SM) instruction manual Compliance Information, T1E1-CF-01SM

Page 1

COMPLIANCE INFORMATION

UL Listed

C-UL Listed (Canada)

CISPR/EN55022 Class A

FCC Regulations

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user’s own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

T1/E1 Copper-to-Fiber

Media Converters

T1E1-CF-01

USER’S GUIDE

TRANSITION Networks T1E1-CF-01 series media converters encode and decode T1 OR E1 signals over duplex fiber cables to extend the distance and transmission reliability of high speed T1 and E1 data traffic.

European Regulations

Warning

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Achtung !

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten, in weichen Fällen der Benutzer für entsprechende Gegenmaßnahmen werantwortlich ist.

Attention !

T1E1-CF-01

Provides an RJ-45 twisted pair connector for T1 OR E1 signals, a set of RX (receive) and TX (transmit) coax connectors for E1 signals, and a set of RX and TX ST connectors to 850 nm multimode fiber-optic cable.

T1E1-CF-01(SM)

Provides an RJ-45 twisted pair connector for T1 OR E1 signals, a set of RX (receive) and TX (transmit) coax connectors for E1 signals, and a set of RX and TX ST connectors to 1300 nm singlemode fiber-optic cable.

Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des interférences radioélectriques, il appartiendra alors à l’utilsateur de prende les measures spécifiques appropriées

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformität.

Trademark Notice

All registered trademarks and trademarks are the property of their respective owners.

Copyright Restrictions

© 1999-2001 TRANSITION Networks.

All rights reserved. No part of this work may be reproduced or used in any form or by any means – graphic, electronic, or mechanical – without written permission from TRANSITION Networks.

Printed in the U.S.A.

33112.E

T1E1-CF-01(SC)

Provides an RJ-45 twisted pair connector for T1 OR E1 signals, a set of RX (receive) and TX (transmit) coax connectors for E1 signals, and a set of RX and TX SC connectors to 850 nm multimode fiber-optic cable.

T1E1-CF-01(LH)

Provides an RJ-45 twisted pair connector for T1 OR E1 signals, a set of RX (receive) and TX (transmit) coax connectors for E1 signals, and a set of RX and TX ST connectors to 1300 nm singlemode fiber-optic cable.

T1E1-CF-01 in the Network . .

. . . . .2

Installation

. . . . .4

Operation

. . . . .7

Fault Isolation and Correction

. . . . .8

Cable Specifications

. . . .10

Technical Specifications

. . . .11

Compliance Information

. . . .12

Image 1
Contents T1E1-CF-01 Compliance InformationT1E1-CF-01SM T1E1-CF-01SCT1E1-CF-01 in the Network FeaturesTN PN Declaration of ConformityCable Specifications Set Switches InstallationIs the Aistp LED on either media converter illuminated? YESIs the SDFiber Signal Detect/Fiber LED illuminated? Is the Power LED on the media converter illuminated?MDI MDI-X YESConnect to Power Install CableOperation Status LEDs

T1E1-CF-01, T1E1-CF-01(LH), T1E1-CF-01(SM), T1E1-CF-01(SE) specifications

Milan Technology has been a frontrunner in the design and production of advanced communication systems, showcasing innovation and functionality in its range of products. Among their notable offerings are the T1E1-CF-01(LH), T1E1-CF-01(SE), T1E1-CF-01, and T1E1-CF-01(SM) models. Each of these systems is distinguished by its specific features and capabilities, catering to diverse communication needs.

The T1E1-CF-01 series is characterized by its support for T1 and E1 protocols, which are foundational for digital communication. These models offer seamless integration and can handle voice and data transmission over a single network. With a robust architecture, they ensure reliability and stability, making them suitable for mission-critical applications.

One of the standout features is the high-level redundancy incorporated into these models. The T1E1-CF-01(LH) and T1E1-CF-01(SE) versions come with dual power supplies and hot-swappable modules, which drastically reduces downtime during maintenance. This redundancy is crucial for businesses that require uninterrupted service and immediate recovery capabilities.

Additionally, these devices boast advanced signal conditioning technologies, allowing them to maintain data integrity over long distances. Features like adaptive equalization and echo cancellation enhance performance, particularly in environments where signal degradation is common.

The T1E1-CF-01(SM) version focuses on simplifying management and configuration processes. It includes a user-friendly interface and supports remote management capabilities, allowing administrators to monitor and control the systems without needing to be physically present. This feature is invaluable for organizations with multiple locations or limited IT resources.

Security is also paramount; all models incorporate advanced encryption and authentication protocols to ensure that communication remains private and secure from unauthorized access. This is particularly important in sectors such as finance and healthcare, where data sensitivity is critical.

Moreover, Milan Technology ensures that all systems are compliant with international standards, making them versatile for both domestic and international operations. With exceptional scalability, the T1E1-CF-01 series can evolve alongside an organization’s growing demands, making them a worthwhile investment for future expansion.

In conclusion, the Milan Technology T1E1-CF-01 series sets a high standard in digital communication, offering technology that is reliable, secure, and adaptable. These models provide everything enterprises need to maintain effective communication networks, ensuring they remain competitive in an ever-evolving technological landscape.