•Unscrew both nuts at pivot end of Blade.
•Slide Blade out of pivot housing to replace or sharpen.
INSPECTION, MAINTENANCE, AND CLEANING
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, dam- aged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
2.Keep blade and and striker plate sharp and clean for better, safer performance. If blade or striker plate become dull or coated with asphalt or granules from shingles, clean with file and/or tar remover (not included).
3.Sharpen Blade when performance decreases. If shingles tear when being cut or cut edge is ragged, blade should be sharpened.
4.Periodically clean and lubricate pivot joint.
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assem- bly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
SKU 96193 | For technical questions, please call | Page |