Specifications
AMPLIFIER SECTION SC-AK410
Power output |
|
|
THD 10%, both channels driven |
| |
60 | 58 W per channel (6 Ω |
|
(Low channel) | ) | |
3 | 58 W per channel (6 Ω |
|
(High channel) | ) | |
Total | ||
Power output |
|
|
THD 10%, both channels driven |
| |
1 kHz | 75 W per channel (6 Ω |
|
(Low channel) | ) | |
10 kHz | 75 W per channel (6 Ω |
|
(High channel) | ) | |
Total | ||
Input sensitivity |
|
|
AUX | 250 mV | |
Input Impedance | 13.3 kΩ |
|
AUX |
|
FM TUNER SECTION
Frequency range
Sensitivity | 2.5 µV (IHF) |
S/N 26 dB | 2.2 µV |
Antenna terminal(s) | 75 Ω (unbalanced) |
AM TUNER SECTION
Frequency range
Sensitivity |
|
S/N 20 dB (at 1000 kHz) | 560 µV/m |
CASSETTE DECK SECTION
Track system |
| 4 track, 2 channel |
Heads |
|
|
Record/playback |
| Solid permalloy head |
Erasure | Double gap ferrite head | |
Motor |
| DC servo motor |
Recording system |
| AC bias 100 kHz |
Erasing system |
| AC erase 100 kHz |
Tape speed |
| 4.8 cm/s (17/8 ips) |
Overall frequency response | ||
(+3 dB, | ||
NORMAL (TYPE I) | 35 | |
S/N |
| 50 dB (A weighted) |
Wow and flutter |
| 0.18% (WRMS) |
Fast forward and rewind time | ||
Approx. 120 seconds with | ||
|
|
CD SECTION
Sampling frequency | 44.1 kHz |
Decoding | 16 bit linear |
Beam source/wavelength |
|
Semiconductor laser/780 nm
Number of channels | Stereo | |
Frequency response |
| |
| 20 | |
Wow and flutter | Below measurable limit | |
Digital filter |
| 8 fs |
D/A converter |
| MASH (1 bit DAC) |
MP3
Bit rate32
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
SPEAKER SECTION
Front speakers
Type | 3 way, 3 speaker system | |
Speaker(s) |
|
|
Woofer | 16 cm (61/2˝) cone type | |
Tweeter | 6 cm (23/8˝) cone type | |
Super tweeter | 2.5 cm (1˝) Piezo type | |
Impedance |
| 6 Ω |
HIGH |
| |
LOW |
| 6 Ω |
Input power |
|
|
HIGH |
| 150 W (Music) |
LOW |
| 150 W (Music) |
Output sound pressure level | ||
|
| 86.5 dB/W (1.0 m) |
Cross over frequency | 3.5 kHz, 10 kHz |
Frequency range 35
Dimensions (WxHxD) 227 x 344 x 250 mm
15 | 17 | 27 |
(8 | /16˝ x 13 /32˝ x 9 /32˝) | |
Mass | 3.4 kg (7.5 lb.) |
GENERAL
Power supply | AC 120 V, 60 Hz |
Power consumption | 225 W |
Dimensions (WxHxD) 250 x 330 x 370 mm
27 | 3 |
(9 | /32˝ x 13˝ x 14/8˝) |
Mass | 7.8 kg (17.1 lb.) |
Power consumption in standby mode: 0.34 W
Note:
1.Specifications are subject to change without notice.
Mass and dimensions are approximate.
2.Total harmonic distortion is measured by the digital spectrum analyzer.
3.SB-AK410
The labels “HIGH” and “LOW” on the rear of the speakers refer to High frequency and Low frequency.
19
RQT6707