Emerson CF110BS00, CF110ORB00 owner manual Read and Save These Instructions, Safety Instructions

Page 2

READ AND SAVE THESE INSTRUCTIONS

Safety Instructions

!WARNING

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

a. Use this unit only in a manner intended by the manufacturer. If you have questions, contact the manufacturer.

b. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel.

1.Read your owner’s manual carefully and keep it for future reference.

2.Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off the power to the ceiling fan before servicing.

3.Do not put anything into the fan blades while they are turning.

4.Do not operate reversing switch until fan blades have come to a complete stop.

Additional Safety Instructions for Installation

1.To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan without blades.

2.All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-2011” and Local Electrical Codes. Use the National Electrical Code if Local Codes do not exist. The ceiling fan must be grounded as a precaution against possible electrical shock. Electrical installation should be made or approved by a licensed electrician.

3.The outlet box and joist must be securely mounted and capable of reliably supporting at least 50 pounds. Use only U.L. outlet boxes listed as “Acceptable for Fan Support of 15.9kg. (35 lbs.) or less”., and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

4.The downrod furnished with the fan proves the minimum recommended floor to fan blade clearance for an 8 foot ceiling.

5.The fan must be mounted with the fan blades at least 7 feet from the floor to prevent accidental contact with the fan blades.

6.Follow the recommended instructions for the proper method of wiring your ceiling fan. If you do not know enough about electrical wiring, have your fan installed by a licensed electrician.

WARNING: To reduce the risk of electrical shock, this fan must be installed with an isolating wall control/switch.

NOTE: This fan is suitable for use with solid-state speed controls.

WARNING: To reduce the risk of fire or electrical shock, this fan should only be used with fan speed control, Model No. UC9020, manufactured by Rhine Electric Co., Ltd.

WARNING: This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson could result in personal injury or property damage.

WARNING: To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

WARNING: To reduce the risk of electrical shock, this fan must be installed with a general use, isolating control/switch.

NOTE: All setscrews must be checked and re-tightened where necessary before installation.

DATE CODE:

The date code of this fan may be found on the box, stamped in ink on a white label. You should record this data above and keep it in a safe place for future use.

2

ETL Model No.: CF110

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Callan Safety Instructions Read and Save These InstructionsPackage Contents Unpacking InstructionsUp to 50 ft 50-100 ft Ceiling Fan AssemblyWire Size A.W.G Emersonfans.com Pin. The hairpin clip must be properly installed to Pin and hanger ball for reinstallation in StepLeads. Route the motor lead wires through InstalledElectrical Requirements How to Hang Your Ceiling Fan Outlet BOX TWO Screws Supplied with Hanger TAB BracketHow to Wire Your Ceiling Fan Wall Control Installation Using Your Ceiling Fan Summer Counter-Clockwise Left Winter RightRepair Parts Repair Parts Listing Trouble Shooting MaintenanceAccessories Downrod Extension Kits see store or catalogEmerson Air Comfort Ceiling Fan Limited Warranty What The Limited Warranty CoversAir Comfort Products

CF110ORB00, CF110BS00 specifications

The Emerson CF110BS00 and CF110ORB00 are two striking ceiling fan models that seamlessly blend aesthetics with functionality, making them perfect additions to various interior designs. These fans are crafted to cater to homeowners looking to enhance their living spaces while ensuring optimal air circulation and energy efficiency.

One of the most notable features of the Emerson CF110BS00 and CF110ORB00 is their sleek and stylish design. Available in two distinct finishes — brushed steel (BS) and oil-rubbed bronze (ORB) — these fans can complement a wide range of decor styles, from modern minimalist to rustic charm. The subtle elegance of the finishes allows them to act as both functional appliances and decorative elements in any room.

These fans are equipped with a robust motor that ensures powerful airflow. The high-performance motor design becomes especially beneficial during the hot summer months, delivering a refreshing breeze while reducing the reliance on air conditioning units, which can lead to significant energy savings. The CF110BS00 and CF110ORB00 also feature three speed settings, allowing users to customize airflow according to their comfort levels.

Another essential characteristic of these ceiling fans is their versatility. They come with a reversible function, enabling them to operate in both clockwise and counterclockwise directions. This feature not only aids in cooling during warmer seasons but also assists in circulating warm air during colder months, making these fans a year-round solution for climate control.

The Emerson CF110BS00 and CF110ORB00 also boast easy installation, thanks to their user-friendly design. The integrated light fixture option allows homeowners to enhance their lighting solutions by combining functionality with style. Additionally, compatibility with various control systems, including pull chains and remote controls, ensures convenience in operation.

Safety and energy efficiency are paramount in the design of these ceiling fans. They are crafted from high-quality materials, ensuring durability and longevity. With the added benefit of energy-efficient operation, these fans are designed to minimize utility bills while maintaining comfort.

In summary, the Emerson CF110BS00 and CF110ORB00 ceiling fans are exemplary models that fuse design, performance, and efficiency. With their stylish finishes, powerful motors, versatile operation, and easy installation, they represent an ideal choice for anyone looking to elevate their home's comfort and aesthetic.
Top Page Image Contents