Husqvarna 966906636, 966906738, 965084001 manual Stopping

Page 21

STARTING AND STOPPING

•Never start a chain saw unless the bar, chain and all covers are fitted correctly. See instructions under the heading Assembly. Without a bar and chain attached to the chain saw the clutch can come loose and cause serious injury.

•The chain brake should be activated when starting. Se instructions under the heading Start and stop. Do not drop start. This method is very dangerous because you may lose control of the saw. (52)

•Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

•Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

•Always hold the saw with both hands. The right hand should be on the rear handle, and the left hand on the front handle. All people, whether right or left handed, should use this grip. Use a firm grip with thumbs and fingers encircling the chain saw handles.

Stopping

Stop the engine by pushing the start/stop switch down.

(53)

CAUTION! The start/stop switch automatically returns to run position. To avoid involuntary start up, the spark plug cap must always be removed from the spark plug when the machine is unsupervised. (54)

1153136-26 Rev.1 2009-12-29

English – 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents
445 445e 450e English 1153136-26 Rev.1 3839 4243 1153136-26 Rev.1 English 102 Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Decompression valve The valveContents What is what on the chain saw? IntroductionDear Customer Before using a new chain saw General Safety PrecautionsAlways use common sense Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guardThrottle lockout Stop switchChain catcher Vibration damping systemCutting equipment Sharpening your chain and adjusting depth gauge settingGeneral rules Cutting equipment designed to reduce kickbackTensioning the chain Lubricating cutting equipment Bar Fitting the bar and chain Assembly445 445e, 450eFuel Fuel HandlingFuelling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingStarting Cold engineStopping Working Techniques Basic safety rulesBefore use General working instructionsBasic cutting technique TermsLimbing Tree felling technique How to avoid kickback What is kickback?Freeing a tree that has fallen badly Maintenance Carburettor adjustmentGeneral Starter MufflerRight hand guard Replacing the starter cordSpark plug Air filterLubricating the bar tip sprocket Needle bearing lubricationTemperature -5C or colder Air Injection centrifugal cleaningCooling system Winter useDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsEN ISO 12100-22003, Cispr 122005, EN ISO EC-declaration of conformity Applies to Europe onlyEnglish 1153136-26 Rev.1 1153136-26 Rev.1 English Original instructions 1153136-26