Husqvarna FS 3800, FS 6500 manual Safety Warnings for Operation of this Machine, Tool

Page 8

BEFORE YOU BEGIN: Read and understand all warnings and instructions before operating the Machine described in this manual. WARNINGS AND CAUTIONS IN THIS MANUAL MUST BE

UNDERSTOOD AND FOLLOWED! FAILURE TO OBEY WARNINGS MAY RESULT IN SERIOUS INJURY OR DEATH. IT IS YOUR RESPONSIBILITY to make sure persons who use this machine have read this manual.

SAFETY WARNINGS FOR OPERATION OF THIS MACHINE

DO read this entire operator’s manual before operating this machine. Understand all warnings, instructions, and controls. DO keep all guards in place and in good condition.

DO wear safety-approved hearing, eye, head and respiratory protection. DO read and understand all warnings and instructions on the machine. DO read and understand the symbol definitions contained in this manual.

DO keep all parts of your body away from the grinding disks and all other moving parts. DO know how to stop the machine quickly in case of emergency.

DO shut off the engine and allow it to cool before refueling.

DO inspect the accessory disk, and tool adapters for damage before installing the tools. DO use only tools manufactured for use on surface grinders.

DO verify grinder drive configuration by checking engine / motor RPM, and spindle shaft RPM, pulley diameters. DO read all safety materials and instructions that accompany any tool used with this machine.

DO inspect each tool carefully before using it. If there are any signs of damage or unusual wear, DO NOT USE THE

TOOL!

DO mount the tool solidly and firmly.

DO make sure the tool and accessory disk are clean and free of dirt and debris before mounting the tool on the saw.

DO use the correct tool for the type of work being done. Check with tool manufacturer if you do not know if tool is correct. DO operate this machine only in well ventilated areas.

DO instruct bystanders on where to stand while the machine is in operation. DO establish a training program for all operators of this machine.

DO clear the work area of unnecessary people. Never allow anyone to stand in near the machine while the engine is running.

DO always tie down the machine when transporting.

DO use caution and follow instructions when setting up or transporting the machine. DO have all service performed by competent service personnel

DO verify that the tool size is compatible with the machine before mounting the tool.

DO make sure the fuel caps of the machine and the fuel can are properly tightened before starting the engine. Move fuel can at least 10 feet from machine after fueling.

DO clean the machine after each day’s use.

DO remove adjusting tool and wrenches from machine before turning it on. DO keep the handles dry, clean and free of oil and dirt.

DO carefully maintain and clean for better and safer performance. Follow instructions for changing accessories. Inspect tool cords periodically and, if damaged, have repaired by authorized service facility.

DO use caution when handling fuel.

DO always give a copy of this manual to the equipment user. If you need extra copies, call TOLL FREE 1-800-288-5040. DO Determine the nature and volatility of any material that will come in contact with the grinding action of the tools used by

this machine.

DO operate the machine only in areas where the material in contact with the grinding tools is known. DO use only non-flammable and proper substances to improve the material removal from the work area.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Husqvarna Construction Products Husqvarna Construction Products, North AmericaTable of Contents Symbol Definitions Definición DE Simbolos Page This Machine is Covered by ONE or More of the Following DECAL, HUSQVARNA, 9.85 Long DECAL, Operation Instructions DECAL, Cover PlateDECAL, Husqvarna FS Safety Warnings for Operation of this Machine ToolWest 119th Street Olathe, Kansas 66061, USA Blade / Engine RPM Failure to Comply can Result in Serious Personal Injury541202902 541202906 541203835 539300026 539300025 DB a Hearing HazardRiesgo DE Daño Auditivo SAW Controls Diagram DescriptionFeatures Dimensions & Shaft RPM See SawAssembly Depth of Cut Maximum Maximum Cutting DepthOperating Instructions Preparing to SawIncidents During Operation Maintenance Spare PartsRepairs VG4D GovernorFS 6500 65 HP V465D Engine Governor Settings Lever DetailFS 3800 & FS 6500 Wiring Schematic FS 3800 & FS 6500 Raise & Lower Electric Schematic Daily Season or Temperature A D E O F O I LI N T E N a N C E P R O C E D U R E E Q U E N C Y PRE-OPERATION Checklist With Machine Cold and Setting LevelPage Dust Warning 504 63
Related manuals
Manual 24 pages 42.23 Kb

FS 6500, FS 3800 specifications

The Husqvarna FS 3800 and FS 6500 are both innovative and powerful floor saws designed for a variety of cutting applications in the construction industry. These machines are engineered to provide reliability, efficiency, and precision, catering to the needs of professional contractors.

The Husqvarna FS 3800 is known for its compact design and high performance. This model features a robust 20 HP engine, ensuring powerful operation while maintaining fuel efficiency. The FS 3800 can handle a variety of cutting tasks, making it suitable for everything from small paving repairs to larger road construction projects. One of its standout features is the adjustable cutting depth, allowing users to achieve the exact cut depth required for their specific applications. Moreover, the machine offers excellent visibility for operators, thanks to its ergonomic design and well-placed controls.

On the other hand, the Husqvarna FS 6500 is designed for heavy-duty use and high performance. Equipped with a powerful 25 HP engine, it delivers exceptional cutting capabilities and reliability in challenging environments. The FS 6500 is capable of cutting through a wide range of materials, including concrete, asphalt, and bricks. Its user-friendly interface simplifies operation, making it accessible for operators of varying experience levels.

Both models incorporate advanced technologies to enhance performance and ease of use. They feature the SmartGuard system, which provides increased guidance during operation and improved safety features. This system minimizes the risk of kickback and ensures a smoother cutting experience. The machines are also equipped with an innovative vacuum system that helps reduce dust emissions, promoting a cleaner working environment.

In terms of portability, the FS 3800 and FS 6500 are equipped with durable foldable handles and transport wheels, enabling easy maneuverability on job sites. Both models are built with high-quality materials that ensure durability and longevity, even in the most demanding conditions.

In conclusion, the Husqvarna FS 3800 and FS 6500 stand out in the market for their robust performance, user-friendly features, and advanced technologies. These floor saws are ideal for professionals seeking reliable equipment to tackle a range of cutting tasks effectively. Their commitment to quality and innovation makes them essential tools for any contractor's toolkit.
Top Page Image Contents