Wiring Instructions

7.With the cabinet installed, the air cleaner can now be wired to electrical input source.

!WARNING

Installation of this unit must comply with local electric codes or other applicable codes.

Review and understand local codes prior to instal- lation.

Failure to do so could result in serious personal injury or death.

8.An air cleaner unit with no air flow monitor requires electrical wiring through the furnace controls. Con- nect wiring to the furnace control terminals (EAC-H) for power, (EAC-N) for neutral and connect metal frame of EAC to ground.

If the air cleaner unit has an air flow monitor, it must be connected to 120 VAC 60 Hz. A 20 amp circuit is more than adequate. If an air flow monitor is not installed but is required for operation, order Air Flow Kit F859- 0381. If a power cord is required, order F97-0019.

9.Remove junction box cover and install the required bushing into the 3/4 in. Knock out. With the supply voltage turned off, route three (3) wires into junction box for connections. (See Fig. 17.)

Insure all wires are clamped, wire connectors prop- erly installed and grommets used to prevent wire abrasion.

Vertical

Section

10.If this unit has an electrical cord, the cord has a grounding type plug with a third (grounding) pin. This plug will fit only into a grounding type power outlet. If the proper type of outlet is not available, contact qualified personnel to install a proper outlet. Do not alter the plug in any way.

▲! WARNING

To reuce the risk of electric shock, The power cord must be connected to an appropriate outlet. Do not alter the plug in any way.

11.With the cabinet Installed, reinstall pre-filter(s) and collecting cell(s) (Figure 18).

NOTE: The contact button and handles on the cell must be facing you and ionizing wires must be on the air intake side.

12. Install the power pack as follows:

Engage the lip on lower inside edge of power pack in the flange on cabinet and carefully close the power pack, making sure that the electrical connector prongs on the power pack enter the slots in the socket on cabinet. When the power pack is fully in place, engage the latch and snap it closed.

Cabinet	Pre-Filters
	Handle

Tape All

Joints

Contact

Button

Collecting Cells	Contact
	Button

Figure 18

Power Pack

Wood Block

Press to Close After	Latch
Latch is Engaged	To Engage
	To Engage

Figure 16

Female Plug

Hot

Neutral

Grounding

Conductor

Front View

Male Plug

Cabinet

Side Edge of

Power Pack

Engage Lip on Lower Inside Edge of Power Pack in Flange.

Figure 17

Figure 19 Installing Power Pack

SST1600, SST1400, SST2000, SST1000 specifications

Emerson’s SST series, including the SST1400, SST2000, SST1000, and SST1600, represents a line of advanced technologies designed to meet the demands of modern industrial automation. Each model within the SST series is engineered with unique features that cater to diverse applications while maintaining high performance, reliability, and efficiency.

The SST1400 is designed for medium-scale automation projects. It incorporates a powerful processing unit that ensures fast response times and enhanced processing capabilities. One of the standout features of the SST1400 is its intuitive user interface, which simplifies programming and monitoring tasks. Additionally, it offers extensive connectivity options, allowing seamless integration with a multitude of sensors and devices, thus enabling greater flexibility in application designs.

Next in the lineup is the SST2000, which is tailored for larger and more complex automation systems. The SST2000 boasts a higher processing power compared to its counterparts, supporting real-time data processing and advanced analytics. This model is particularly known for its robust security features, making it a suitable choice for industries where data integrity and protection are paramount. Moreover, the SST2000 supports various communication protocols, ensuring it can connect and communicate with legacy systems as well as modern IoT devices.

The SST1000 is the entry-level model in the series but comes packed with essential features that make it an excellent choice for smaller operations. It provides users with a cost-effective solution without compromising on basic functionalities. The SST1000 includes a range of built-in I/O options and is designed for easy scalability. Its compact design allows it to fit into constrained spaces while still delivering reliable control and monitoring capabilities.

Lastly, the SST1600 is a versatile model that bridges the gap between high performance and user-friendly operation. This system is optimized for mixed-automation environments, supporting various applications through its flexible architecture. With options for customizable modules, the SST1600 can easily adapt to specific operational needs. Key features include an onboard diagnostics system that enhances troubleshooting and maintenance, ensuring minimal downtime.

In conclusion, Emerson’s SST series—encompassing the SST1400, SST2000, SST1000, and SST1600—offers a range of automation solutions catering to various industrial applications. Each model is equipped with distinct features and technologies that collectively enhance performance, connectivity, and operational efficiency. Whether for small-scale or large-scale implementations, the SST series provides the flexibility and reliability required in today's automated environments.