Assembly
Step 11
Note: This step is only used if you do not have the Leg Press 2 attachment. Use the Cable Adapter (70) in place of the pulley.
Note: Stretch all cables out completely and make sure all twisting is removed before installing.
Install Leg Press Cable Substitute (78) as detailed in Figure 11. Follow dotted lines to identify exact location of pulleys.
You will need the following for installation: Cable Adapter (70) - Qty. 1
Longer Pulley Spacer (72) - Qty. 2 Cable (78) - Qty. 1
Bolt (79) - Qty. 1 Washers (91) - Qty. 2 Nylon Locknut (92) - Qty. 1
Figure 11
20