Indesit IWB 5113 manual Installation, Unpacking and levelling

Page 2

Installation

GB

! This instruction manual should be kept in a safe place for

future reference. If the washing machine is sold, transferred

 

 

or moved, make sure that the instruction manual remains

 

with the machine so that the new owner is able to familiari-

 

se himself/herself with its operation and features.

 

! Read these instructions carefully: they contain vital infor-

 

mation relating to the safe installation and operation of the

 

appliance.

 

Unpacking and levelling

 

Unpacking

 

1. Remove the washing machine from its packaging.

 

2. Make sure that the washing machine has not been

 

damaged during the transportation process. If it has been

 

damaged, contact the retailer and do not proceed any

 

further with the installation process.

 

3. Remove the 3 protective

 

screws (used during tran-

 

sportation) and the rubber

 

washer with the correspon-

 

ding spacer, located on the

 

rear part of the appliance

 

(see figure).

4.Close off the holes using the plastic plugs provided.

5.Keep all the parts in a safe place: you will need them again if the washing machine needs to be moved to ano- ther location.

!Packaging materials should not be used as toys for children.

Levelling

1. Install the washing ma- chine on a flat sturdy floor, without resting it up against walls, furniture cabinets or anything else.

2. If the floor is not perfectly level, compensate for any unevenness by tightening or loosening the adjustable front feet (see figure); the

angle of inclination, measured in relation to the worktop, must not exceed 2°.

Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine.

Connecting the electricity and water supplies

Connecting the water inlet hose

1. Connect the supply pipe by screwing it to a cold water tab using a ¾ gas threaded connection (see figure).

Before performing the con- nection, allow the water to run freely until it is perfectly clear.

2. Connect the inlet hose to the washing machine by screwing it onto the corre- sponding water inlet of the appliance, which is situa- ted on the top right-hand side of the rear part of the appliance (see figure).

3. Make sure that the hose is not folded over or bent.

!The water pressure at the tap must fall within the values indicated in the Technical details table (see next page).

!If the inlet hose is not long enough, contact a specialised shop or an authorised technician.

!Never use second-hand hoses.

!Use the ones supplied with the machine.

2

Image 2
Contents Instructions for use Washing MachineUnpacking and levelling InstallationConnecting the electricity and water supplies 65 100 cm First wash cycle Blue Neutral N Brown Live L Green & Yellow Earth ETechnical data Description of the washing machine and starting a wash cycle Control panelIndicator lights Starting a wash cycleWash cycles Table of wash cyclesFunctions Setting the temperaturePersonalisation Load balancing system Detergents and laundryDetergent dispenser drawer Preparing the laundryDisposal Precautions and tipsGeneral safety Care and maintenance Troubleshooting Problem Possible causes / SolutionsMachine is noisy Assistance Essential Contact Information After Sales Service195078835.02 Recycling & Disposal Information
Related manuals
Manual 16 pages 32.09 Kb

IWB 5113 specifications

The Indesit IWB 5113 is a front-loading washing machine that epitomizes efficiency and reliability, making it a popular choice for households seeking an effective laundry solution. With its sleek design and user-friendly interface, this appliance seamlessly blends functionality with aesthetic appeal, catering to modern living.

One of the standout features of the IWB 5113 is its generous 5 kg capacity, which is ideal for small to medium-sized families. This capacity allows users to wash larger loads, ultimately reducing the number of cycles needed, saving both time and energy. The washing machine offers a maximum spin speed of 1000 RPM, ensuring that clothes come out drier, thus minimizing drying time.

Indesit has integrated several advanced washing programs into the IWB 5113, ensuring that it meets a wide range of laundry needs. These include specialized cycles for cotton, synthetics, and delicate fabrics. Additionally, there is a dedicated program for cleaning sportswear, which requires a different approach to remove sweat and stains effectively.

The IWB 5113 is equipped with the innovative Push & Wash feature, a unique technology designed to simplify the laundry process. With just a push of a button, users can initiate a 30-minute wash cycle at 30°C, perfect for when you're in a rush or need to freshen up a lightly soiled load. This feature not only offers convenience but also contributes to energy savings.

Energy efficiency is another highlight of the Indesit IWB 5113, as it is rated a class C for energy efficiency, a significant improvement over older models, helping users to lower their electricity bills without compromising on performance. The machine also boasts a range of programs that optimize water and energy usage, ensuring that every load is washed in the most eco-friendly manner possible.

In terms of safety, the IWB 5113 is designed with an out-of-balance load detection system, which helps maintain stability during the spin cycle, preventing excessive noise and vibration. The delay start function allows users to schedule washes at their convenience, accommodating busy lifestyles.

In conclusion, the Indesit IWB 5113 washing machine is a robust and versatile appliance that meets the demands of everyday laundry tasks. With its range of features, advanced technologies, and energy efficiency, it provides an excellent balance of performance, convenience, and ecological responsibility, making it a great choice for the modern home.