Detailed Cleanup

Cleanup

A thorough cleaning after each use of the roller is important to keep it in good working order.

NOTE: When using latex paint, use warm soapy water for cleaning parts. When using oil paint, the appropriate solvent is often mineral spirits. Always follow the paint manufacturer's recommendations for appropriate solvent. Not recommended for lacquer and other hard solvents.

CAUTION

1.Pull one end of the splatter shield out of the end cap and slip opposite end off of the roller handle.

2.Press the locking tab and remove the roller cover and roller core.

3.Unscrew the end cap and slide the roller cover off of the roller core.

Tab

End Cap

Core

Cover

Shield

Do not turn the roller upside down or on its side. If liquid gets inside the drive housing it could damage the unit.

Quick Cleanup

The following steps outline the basic cleanup procedures. For more detailed instructions on how to perform each step, refer to the Detailed Cleanup section in this manual.

1. Clean the roller cover.

2. Remove paint in hose.

3. Empty fluid tank.

4. Clean hose.

5. Clean roller handle.

6. Remove the pump assembly.

7. Remove and clean the valves. 8. Clean the pump assembly.

9. Clean and lubricate the	10. Reassemble the pump and
piston and O-ring.	attach it to the drive housing.

4. Clean the roller cover with the appropriate solvent.

NOTE: For latex, clean roller cover, core and end cap thoroughly in warm soapy water.

For oil-based paints, clean roller cover, core and end cap in the appropriate solvent recommended by the paint manufacturer.

Removing Paint from the Hose and Container

1. Remove the drive housing from fluid container.

2.	Hold the roller handle over
	the paint pail and run the	1	2
	pump to remove excess
	paint from hose and pump.
3.	Pour remaining paint from
	container back into paint pail.
Cleaning the Hose			3
Thoroughly

For Latex:

1. Remove the hose from the motor compartment.

2. Insert the hard plastic tube of the faucet adapter into the paint hose.

3. Push the adaptor over a faucet.

4.Slowly increase the water pressure and run water through the hose and handle until the water come out clean.

For Oil:

1.Fill the paint container with the appropriate solvent recommended by the paint manuafacturer.

2.Circulate the solvent through hose and roller arm for several minutes.

Cleaning the Roller Handle Assembly

1. Remove the seal from the end of the roller handle. Note the direction of the lip for correct replacement.

2. Clean the handle and seal thoroughly.

3. Apply a thin layer of petroleum jelly to the seal.

4. Replace the seal in the proper direction.

Removing the Pump from the Drive Housing

1. Turn the retaining nut on the pump counterclockwise.

2. Pull out the pump assembly.

NOTE: The piston will remain attached.

3. Wipe excess paint off of the piston. 4. Apply a thin layer of petroleum jelly to the pump O-Ring.

R	English	4	©1997 Wagner Spray Tech. All rights reserved.

Cordless Power Roller specifications

The Wagner SprayTech Cordless Power Roller is a revolutionary tool designed to streamline the painting process, offering efficiency and convenience that traditional rollers simply cannot match. This innovative power roller takes the labor-intensive task of painting and transforms it into a more manageable and enjoyable activity, perfect for both DIY enthusiasts and professional painters alike.

One of the standout features of the Wagner Cordless Power Roller is its cordless operation. Powered by a rechargeable battery, it eliminates the hassle of tangled cords and the need for nearby power outlets. This freedom allows users to maneuver freely across a variety of surfaces, whether they are tackling interior walls, ceilings, or exterior projects. The battery life is impressive, providing ample runtime to complete most jobs without interruptions.

The Power Roller boasts a built-in material delivery system that ensures an even and consistent paint application. Its adjustable speed settings allow users to customize the flow of paint according to their preferences and the specific requirements of the task at hand. By providing control over the paint delivery, the roller minimizes overspray and reduces waste, making it a more environmentally friendly option.

Another notable characteristic is its interchangeable roller covers, which allow users to switch between different textures and finishes. This adaptability is great for achieving the desired look on various surfaces, from smooth drywall to textured finishes. The roller is also designed for easy cleanup, with removable components that can be quickly washed after a job.

The ergonomic design of the Wagner Cordless Power Roller enhances user comfort, making it suitable for extended periods of use. Its lightweight construction reduces fatigue, while the well-placed grips ensure a secure hold during operation. Additionally, the roller's compact size makes it easy to store and transport.

Incorporating advanced technologies, the Wagner SprayTech Cordless Power Roller is not just a tool, but a game-changer in the painting industry. With its innovative features and thoughtful design, it empowers users to achieve professional-quality finishes with ease and efficiency, revolutionizing the way we approach painting projects. Whether you're a homeowner looking to refresh your spaces or a contractor needing a reliable tool, this power roller is an investment worth considering.

Wagner SprayTech Cordless Power Roller owner manual Detailed Cleanup, Quick Cleanup