Grizzly G8691 instruction manual Safety Instructions For Power Tools

Page 3

SECTION 1: SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

 

 

 

Indicates an imminently hazardous situation which, if not avoided,

 

 

 

WILL result in death or serious injury.

 

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

 

 

COULD result in death or serious injury.

 

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

 

MAY result in minor or moderate injury. It may also be used to alert

 

 

 

against unsafe practices.

 

 

 

 

 

 

 

NOTICE

 

This symbol is used to alert the user to useful information about

 

 

proper operation of the equipment.

 

 

 

 

Safety Instructions For Power Tools

1.KEEP GUARDS IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning on.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.DON’T USE IN DANGEROUS ENVIRON- MENT. Don’t use power tools in damp or wet locations, or where any flammable or noxious fumes may exist. Keep work area well lighted.

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.

6.MAKE WORK SHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.

7.DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not designed.

-2-

G8691 Wood Lathe w/ Stand

Image 3
Contents Wood Lathe with Stand Table Of Contents Safety Instructions For Power Tools SafetyLength AMP Rating Additional Safety Instructions For The Lathe Grounding Circuit Requirements110V Operation Extension CordsCommentary IntroductionPiece Inventory UnpackingSite Considerations Clean UpTool Rest AssemblyBeginning Assembly StandASSEMBLY, Spur CenterFaceplate Operations Test RunSpindle Turning Speed Selector OPERATIONS,Maintenance GeneralLubricationBelt Closure Machine Data Sheet G8691 Wood Lathe w/ Stand PW06M Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC