28.Do not attempt to engage the spindle lock pin until the spindle has stopped. If leaving the machine area, turn lathe off and wait until the spindle stops before departing.
29.Make no adjustments except speed changes with the spindle rotating, and always disconnect the machine from the power source when performing maintenance to avoid accidental starting or electrical shock.
30.Provide for adequate space surrounding work area and
31.When stopping the lathe, never grab the part or faceplate to slow it down. Let the work coast to a stop.
32.Use only JET factory authorized replacement parts and accessories; otherwise, the warranty and guarantee are null and void.
33.Do not use this JET wood lathe for other than its intended purpose. If used for other purposes, JET, disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.
This means that if precautions are not heeded, it may result in serious, or possibly even fatal, injury.
4.0About this manual
This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model
This manual is not intended to be an exhaustive guide to lathe operational methods, use of
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our web site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Read and understand the entire contents of this manual before attempting assembly or operation! Failure to comply may cause serious injury!
5