Jet Tools JPS-10 specification

Blade changing on the JET ProShop 10" Table Saw is easier than ever thanks to a pushbutton arbor lock that is built into the table surface! A specially shaped wrench is included that fits the blade- retaining nut and the nuts retaining the splitter assembly.

While bringing the motor inside of the cabinet, we moved the sometimes difficult to reach bevel stop adjusters to the outside. Making these adjustments is now a matter of inserting the included 4mm hex wrench into sockets in the table surface to fine-tune the 0-degree and 45-degree blade tilt stops.

Blade changing on the ProShop saw requires the included blade wrench and a single finger to depress the arbor lock.

The JET ProShop 10" Table Saw is powered by a 1 ¾ Hp TEFC (totally enclosed fan cooled) motor that comes wired for 115V operation but can be converted to use 220V power. This high-power motor develops a stable 3600-rpm arbor speed, optimum for cutting woods of all species. Designed for long-term maintenance-free use, the motor has built-in thermal protection that shuts it down in the event of a bind at the blade that could damage it. A user-accessible reset button on the motor gets you get back to work after the problem is remedied and the motor has cooled sufficiently.

Locating the motor fully within the cabinet (left) allowed us to add effective dust collection in the form of a special cabinet floor and this rear cover (right) featuring a molded in 4” hose connection.

An additional benefit of locating the motor within the cabinet was clearing the way for the addition of an effective dust collection system to the JET ProShop 10" Table Saw. The rear dust cover (with an integral 4” dust collector hose connection) is secured by four finger knobs, making access to the cabinet for maintenance quick and tool free.

The new fence system is built around a heavy gauge steel tube and T-square-style base rather than an aluminum extrusion. A pair of 2 ½”-tall aluminum faces flank the steel tube. In addition to providing a straight, smooth surface for guiding material, the overall square shape of the fence makes building and using shop-built jigs easy. We even added a slot along the top of the aluminum fence faces that accepts common ¼ - 20 hex head bolts to make installing shop-made jigs fast, easy and very secure. The T-square base has easy to use adjustments that make aligning the fence parallel to the miter slots and its faces square to the table a fast, precise task that is not often repeated.