Jet Tools JWCS-10A Adjusting 45 and 90 Positive Stops, Wear Adjustment in Raising Mechanism

Page 12

WARNING

When making￿adjustments always

disconnect saw from the power source!

Failure to comply may cause serious injury!

Adjusting 45° and 90° Positive Stops

• Hardware: Square

• Tools: 3mm Hex Wrench, 10mm Wrench

1. Disconnect saw from power source.

2. Raise the saw blade to its maximum height.

3. Set the blade at 90° to the table by turning the blade tilting handwheel counterclockwise as far as it will go. Do not force beyond stop.

4. Place a square on the table and check to see that the blade is at a 90° to the table, (Figure 12). Make sure square is not touching a blade tooth.

5. If blade is not at 90° , loosen nut (A, Fig. 13) and turn adjusting stop screw (B, Fig. 13) in, or out. The adjusting stop screw should stop against the end of the tilting screw (C, Fig. 13) when the blade is 90° to the table. Tighten lock nut.

6. Place a square on the table after turning the blade to the 45° stop. If the 45° stop is not set properly, loosen nut (E, Fig. 13) and adjust screw (D, Fig. 13) until the stop touches the table and the blade is in the 45° position. Tighten the nut

7. Adjust the pointer for accuracy.

Wear Adjustment in Raising Mechanism

•Tool: 15/16” Wrench

1.Disconnect the saw from the power source.

2.Remove lock knob and raising handwheel but do not remove pointer, (Figure 14).

3.Loosen lock nut (A, Fig. 14) using a 15/16" wrench.

4.Use the pointer (B, Fig. 14) as a lever and turn left, or right until all perceptible play between the worm and arbor bracket is removed.

5. Tighten the lock nut and reset the pointer.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents JWCS-10A Cabinet Saw Warranty on this product JET offers a two-year limitedPage Grounding Instructions Volt OperationDisconnect the machine from the power source Table of Contents SpecificationsContents of the Shipping Container Tools Included for AssemblyTools Required for Assembly & Adjustments Unpacking and Clean-UpInstallation and Leveling Motor Cover AssemblyExtension Wing Assembly Hand Wheel Assembly Blade Guard AssemblyInstalling Blade Aligning Blade Guard and SplitterTable Insert Adjustment Mounting Rails & Extension Table Miter Gauge OperationBlade Raising and Tilting Mechanism Adjusting 45 and 90 Positive Stops Wear Adjustment in Raising MechanismDisconnect saw from power source Disconnect the saw from the power sourceWear Adjustment in Tilting Mechanism Electrical ConnectionsChanging Belts Extension Cord RecommendationsTroubleshooting Possible Cause Solution Cabinet & Table Assembly Parts List For The JWCS-10A Cabinet & Table Assembly Index Part Description Size QtyJWTS10-MGA Motor & Trunnion Assembly Parts List For The JWCS-10A Motor & Trunnion Assembly Blades and Accessories

JWCS-10A specifications

The Jet Tools JWCS-10A is a high-performance wood chipper designed to meet the needs of both professional woodworkers and DIY enthusiasts. Renowned for its robust construction and powerful performance, the JWCS-10A is ideal for handling a variety of materials, making it a valuable addition to any workshop or outdoor space.

One of the standout features of the JWCS-10A is its powerful 10 HP engine, which provides the necessary torque to handle tough jobs efficiently. This high-capacity engine enables the machine to chip away at branches, leaves, and other debris with ease. The JWCS-10A boasts a high processing capacity, allowing users to chip materials up to 10 inches in diameter. This capability makes it suitable for both home landscaping projects and larger, more demanding applications.

The JWCS-10A incorporates advanced technology to enhance its performance and user experience. It features a heavy-duty steel construction that ensures durability and longevity, allowing this chipper to withstand rigorous use. The design includes a unique cutting mechanism, utilizing sharp, precision-ground blades that not only ensure clean cuts but are also easy to replace, making maintenance a breeze.

Another key characteristic of the JWCS-10A is its large, easily accessible feed chute. This feature simplifies the process of feeding material into the chipper, minimizing the time and effort required. Additionally, the JWCS-10A has a self-feeding design, which means that branches and debris can be fed into the chipper without manual assistance, saving both time and energy for users.

Safety is a top priority with the JWCS-10A. The machine is equipped with safety features such as a safety shut-off switch and a discharge chute that minimizes the risk of debris being projected back toward the operator. This focus on safety ensures that users can operate the chipper with confidence.

Portability is another advantage of the JWCS-10A. It comes with large wheels, allowing for easy maneuverability across various terrains. This makes it simple to transport the machine to different job sites or around the yard.

In conclusion, the Jet Tools JWCS-10A is a powerhouse in the realm of wood chippers, combining performance, durability, and safety features into one reliable machine. Its ability to process large volumes of material efficiently makes it an essential tool for anyone looking to manage yard waste effectively. Whether you are a professional landscaper or a hobbyist, the JWCS-10A promises to deliver exceptional performance with every use.
Top Page Image Contents