Installation, Before You Begin, Important Notes

MSR7007

INSTALLATION

This unit is designed for installation in vessels with an existing standard size DIN radio opening.

8.Test radio operation by referring to the operating instructions for the unit.

Before You Begin

1.Disconnect Battery

Before you begin, always disconnect the battery negative terminal.

2.Remove Transport Screw

Please remove the shipping screw before installation. If the screw is left in place, the CD mechanism will not operate.

Important Notes

•Before final installation, test the wiring connections to make sure the unit is connected properly and the system works.

•Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

•Consult with your nearest dealer if installation requires the drilling of holes or other modifications to your vessel.

•Install the unit where it does not interfere with driving and cannot injure passengers if there is a sudden or emergency stop.

•Avoid installing the unit where it will be subject to high temperatures from direct sunlight, hot air, or from a heater, or where it would be subject to excessive dust, dirt or vibration.

•Install the unit within 30° of the horizontal plane.

DIN Front Mount

1.Check the dashboard opening size by sliding the radio into it. If the opening is not large enough, carefully cut or file as necessary until the radio easily slides into the opening. Check that there will be sufficient space behind the dashboard for the radio chassis. Use the included drilling template to prepare the opening on a new mounting surface.

2.Place the radio in front of the dashboard opening so the wiring can be brought through the DIN opening.

3.Follow the wiring diagram carefully and make certain all connections are secure and insulated with crimp connectors or electrical tape to ensure proper operation.

4.After completing the wiring connections, turn the unit on to confirm operation (vehicle accessory switch must be on). If the unit does not operate, recheck all wiring until the problem is corrected. Once proper operation is achieved, turn the accessory switch off and proceed with final mounting of the chassis.

5.Carefully slide the radio into the dashboard making sure it is right-side-up.

6.Attach one end of the Perforated Support Strap (supplied) to the Rear Support Stud on the rear of the chassis using the M5 Mounting Nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and plain washer provided. Bend the strap, as necessary, to position it.

CAUTION: The perforated rear support strap must be used in the installation of the radio. Installation without the strap may result in damage to the radio or the mounting surface and void the manufacturer’s warranty.

7.Install the six #6 Stainless Steel Mounting Screws through the front of the radio into the dashboard.

CAUTION: Radio must be secured using all 6 mounting points. Failure to do so may result in damage to the radio or dashboard.

	USED TO SECURE TO
STANDARD SIZE DIN	SUB DASH STRUCTURE
	M5 MOUNTING NUT

REAR SUPPORT STUD

PERFORATED REAR

SUPPORT STRAP

#6 ROUND HEAD STAINLESS STEEL

MOUNTING SCREW (6-PLCS.) MINIMUM SCREW LENGTH 1 1/2"

Reconnect Battery

When wiring is complete, reconnect the battery negative terminal.

MSR7007 specifications

The Jensen MSR7007 is a sophisticated car media receiver that elevates your in-car audio experience through a blend of advanced technology and user-friendly features. Designed for music enthusiasts and casual listeners alike, this device integrates modern connectivity options and comprehensive audio functionalities to ensure a seamless listening experience.

At the core of the Jensen MSR7007 is its Bluetooth technology, which allows for wireless streaming of music from smartphones and other compatible devices. This feature not only enables hands-free calling but also simplifies the process of enjoying your favorite tracks without the need for cumbersome cables. The receiver supports multiple Bluetooth profiles, enhancing compatibility with a wide array of devices.

One of the standout features of the MSR7007 is its large, bright LCD display, which provides easy visibility of track information, settings, and other functionalities. This LED display is paired with intuitive controls, allowing users to navigate through playlists and settings effortlessly. The receiver is also equipped with USB and auxiliary inputs, enabling direct connections for playing music from external devices such as USB drives or MP3 players.

In terms of sound quality, the Jensen MSR7007 excels with its built-in amplifier and an equalizer, giving users the ability to tailor audio output to their preference. The receiver features multiple preset EQ settings that cater to various music genres, ensuring that every note and beat comes through with clarity. Additionally, the unit is compatible with AM/FM radio, allowing listeners to tune into their favorite radio stations.

The MSR7007 is designed with user safety in mind. A built-in microphone facilitates hands-free communication, making it safer to take calls while driving. Furthermore, the device supports steering wheel control compatibility, enabling users to manage music playback without taking their hands off the wheel.

Durability is another characteristic of the Jensen MSR7007. Built to withstand the rigors of everyday use and the varying conditions of car interiors, this receiver is a long-lasting addition to any vehicle. Its modern design and functionality make it a suitable choice for car audio enthusiasts seeking a reliable and feature-rich media receiver, perfectly combining technology, convenience, and sound quality.