ASSEMBLING
TABLE LOCK HANDLE
1.Thread table lock handle (A) Fig. 5, into the thread- ed hole (B) of the arm bracket.
B
A
Fig. 5
ROTATING TABLE
TO 90 DEGREE POSITION
1.Loosen table lock handle (A) Fig. 6, one or two turns and depress index lever (B) to release 45 degree positive stop.
2.Rotate table to the left until index stop engages with the 90 degree positive stop (C) Fig. 6. Then tighten table lock handle (A).
ASSEMBLING DUST BAG (OPTIONAL)
1.Assemble dust bag (A) Fig. 7, to the dust spout (B) making sure the wire ring (C) is engaged with the groove in the spout.
FASTENING MITER SAW
TO SUPPORTING SURFACE
Before operating your compound miter saw, make sure it is firmly mounted to a sturdy workbench or other sup- porting surface. Four holes are provided, two of which are shown at (A) Fig. 8, for fastening the saw to a supporting surface.
When frequently moving the saw from place to place we suggest that the saw be mounted to a 3/4" piece of plywood. The saw can then be easily moved from place to place and the plywood clamped to the supporting surface using “C” clamps.
C B A
Fig. 6
C 
B
A
Fig. 7
A
Fig. 8
5