Additional Safety Rules for Table Saw

DW744-XE/387486-01 5/1/02 3:44 PM Page 8

Description Fig. 2

Figure 2 shows all the loose items and hardware packed with the saw.

1.Rip fence

2.Blade (attached to saw base)

3.Arbor wrench and spindle wrench (attached to saw base)

4.Blade guard

5.Throat plate

6.Mitre gauge

Description Fig. 3

1.Table

2.Screw-down holes

3.Mitre gauge

4.Mounting holes

5.ON-OFF switch

6.Rail lock lever

7.Bevel lock lever

8.Blade height adjustment wheel

9.Fine adjust knob

10.Rip scale indicator

Description Fig 4.

1.Blade guard

2.Work support extension (retracted)

3.Blade/wrench storage

4.Dust exhaust

5.Rip fence latch

6.Anti-kickback teeth

Description Fig. 5

1.Pin

2.Opening

Description Fig. 7

1.Spindle

2.Inner washer

3.Blade

4.Outer washer

5.Arbor nut

Description Fig 7A

1.Torx head bolts

2.Rear pivot bracket

3.10mm hex bolts

4.Rear pinion bearing assembly

5.Saw shown upside down for clarity

Description Fig. 8 1. Arbor wrench

Description Fig. 9 1. Rail lock lever

Description Fig. 10

1.Shims

2.Bolts

Description Fig. 11 1. Edge of splitter

Description Fig. 15 1. Fine adjust knob

Description Fig. 16 1. Screws

Description Fig. 17

1.Padlock insertion hole

2.ON-OFF Switch

Description Fig. 18

1.Belville washers

2.Nut

3.Gap

Description Fig. 19

1.Bevel stop cam

2.Bevel stop screw

3.Pointer screw

Description Fig. 21

1.Lock handle

2.Stop plate

3.Adjusting screw

4.Nut

Description Fig. 22 1. Push stick

Description Fig. 24

1.Dust access door

2.Hair pin cotters

3.Central dust cover scew

Description Fig. 25

1. Height adjustment threads

WARNING: For your own safety, do not operate your saw until it is completely assembled and installed according to the instructions and until you have read and understood the following :

•All Safety Rules

•Assembly Procedures

•Operating Controls

•Adjustment Procedures

•Basic Operations

•KEEP guards in place and in working order.

•STABILITY. Make sure table saw is firmly mounted before use.

•MINIMISE ACCIDENT POTENTIAL. Most accidents are caused by failure to follow setup and operating instructions.

•AVOID awkward hand positions, where a sudden slip could cause a hand to move into a saw blade or other cutting tool. Never reach in back of, or around, the cutting tool with either hand to hand down the workpiece. DO NOT PLACE FINGERS OR HANDS IN THE PATH OF THE SAW BLADE.

•NEVER reach under your machine when operating or make any adjustments when it is running.

•SHUT OFF the saw and disconnect the power cord when removing the table insert, changing the cutting tool, removing or replacing the blade guard, or making adjustments.

•ALWAYS maintain control of the workpiece. DO NOT let go of the workpiece until it is well clear of the cutting tool.

•WHEN REMOVING short workpieces, or cleaning up around the table, be sure the saw is in the OFF position and blade has stopped turning.

•NEVER turn the saw ON before clearing the table of all tools, wood scraps, etc., except the workpiece and related feed or support devices for the operation planned.

•WHEN changing saw location, disconnect power.

•USE extra caution when the guard assembly is removed for resawing, dadoing, rabbeting, or moulding. Replace the guard as soon as that operation is completed.

•NEVER hold onto or touch the “free end” of the workpiece or a “free piece” that is cut off, while power is ON and/or the saw blade is rotating.

DW744X, DW744XRS specifications

The DeWalt DW744XRS and DW744X are two highly regarded portable table saws designed for both professional contractors and dedicated DIY enthusiasts. These robust tools combine power, versatility, and advanced features, making them ideal for a range of woodworking projects.

One of the standout features of the DW744XRS is its 15-amp motor, delivering a no-load speed of 3,850 RPM. This powerful motor provides ample cutting capacity for various materials, ensuring that users can tackle even the most demanding tasks with ease. The DW744X, while similar in many respects, also boasts a durable 15-amp motor, making both saws capable of handling heavy-duty applications.

Both models are equipped with a patented Rack and Pinion telescoping fence system, which allows for smooth, accurate adjustments. This feature simplifies the process of measuring and adjusting cuts by ensuring that the fence remains parallel to the blade, enhancing overall precision. The fence can be easily adjusted from 18 inches to 24 inches, supporting a wider range of cutting applications.

Safety is a significant concern for DeWalt, and both the DW744XRS and DW744X come with an onboard smart guard system that includes a blade guard, anti-kickback pawls, and a riving knife. This system not only enhances user safety but also improves cutting efficiency by minimizing blade binding and kickback.

Portability is another key attribute of both models. The DW744XRS includes a rolling stand, making it easy to transport to job sites or storage locations. The stand can be set up quickly and features a wide stance for added stability during operation. The DW744X, while lacking the rolling stand, remains lightweight and easily transportable due to its compact design.

Additional features include a 24-tooth carbide blade that delivers clean, smooth cuts, and an adjustable depth of cut up to 2.5 inches at 90 degrees. The blade height can be adjusted quickly, ensuring versatility for various types of cuts, including crosscuts and rip cuts.

Overall, the DeWalt DW744XRS and DW744X table saws offer a perfect blend of power, safety, and ease of use. Whether you are working on a large construction project or tackling detailed woodworking tasks at home, these saws provide reliable performance and high precision, making them an excellent investment for any woodworking enthusiast.