General Wiring Guidelines

6 en	FPE-1000-SLC

module carefully into position along the guide rails (refer to Figure 1, Page 4, Item 1)

2.Ensure that the connections seat into the slot properly (refer to Figure 1, Page 4, Item 2).

3.Press down softly until the snap-fit hook locks into place (refer to Figure 1, Page 4, Item 3).

4.Connect the earth ground wire to the ground blade terminal on the right side of the mainboard (refer to Figure 1, Page 4, Item 4).

To remove a plug-in module, press the snap-fit hook carefully from left to right and pull the board toward the panel front.

Wiring

Electrical energy from one wire can transfer to another wire producing induced noise which can interfere with telephone communication or cause false alarms. To avoid induced noise, follow these guidelines:

-Keep input wiring away from high current output and power wiring. Pull separate cables for high-voltage circuits, phone line circuits, Option bus, Notification Appliance circuits, Signaling Line circuits, and relay circuits.

-Pull wires from different groups through separate conduits. If you must run them together, do so for as short a distance as possible or use shielded cable. Connect the shield to earth ground at the panel. High and low voltage circuits must be separated.

-Route wiring around not across the circuit board. Wiring proximity to the circuit board could induce noise into sensitive electronic elements or pick up unwanted RF noise from the high speed circuits.

-High frequency noise, such as that produced by the inductive reactance of a speaker or bell, can be reduced by running the wire through ferrite shield beads or by wrapping the wire around a ferrite toroid.

Signaling Line Circuit Wiring

The Signaling Line Circuit connects to analog addressable devices.

Refer to the FPA-1000 Installation and Operation Guide (P/N F.01U.173.607) for:

-listing of compatible devices

-detailed wiring style requirements.

Signaling Line Circuits may be wired as Class A Style 6 or 7 or Class B Style 4 circuits. Class A configuration is recommended because this allows the system to poll the circuit in both directions, ensuring circuit operation in the event of a single break in the wiring.

The Signaling Line Circuit is power-limited and supervised.

No special wire is required for addressable loops. The wire can be untwisted, unshielded, solid or stranded as long as it meets the National Electric Code 760-51 requirements for power-limited fire protective signaling cables.

F.01U.078.099 5.0 2011.11

Bosch Security Systems, Inc.

FPE-1000-SLC specifications

Bosch Appliances has long been synonymous with quality, innovation, and reliability in the realm of home appliances. Among their impressive lineup, the Bosch FPE-1000-SLC stand out for its sleek design, advanced technology, and exceptional performance, making it an ideal choice for modern kitchens.

One of the key features of the Bosch FPE-1000-SLC is its powerful cooking capabilities. This appliance combines convection and traditional cooking methods, allowing for evenly cooked meals with enhanced flavors. The convection technology circulates hot air throughout the oven, ensuring that dishes are cooked uniformly. Whether you're baking bread, roasting vegetables, or preparing complex multi-course meals, this appliance can handle it all with ease.

Another highlight of the Bosch FPE-1000-SLC is its user-friendly interface. The intuitive control panel includes a digital display that simplifies navigation through a variety of cooking modes and settings. This feature is particularly beneficial for those who may not be culinary experts, as it allows them to easily select the desired cooking function without any hassle. Moreover, the appliance offers pre-programmed recipes, making it convenient for users to achieve perfect results every time.

The Bosch FPE-1000-SLC also boasts a spacious interior, accommodating large roasts and casserole dishes, which is ideal for family dinners or entertaining guests. Additionally, its versatile cooking options include broil, bake, and proof settings, enhancing its functionality in your kitchen.

Energy efficiency is another characteristic that sets this appliance apart from the competition. Bosch designs its products with sustainability in mind, and the FPE-1000-SLC is no exception. It features an eco-friendly mode that reduces energy consumption while still delivering outstanding performance.

In terms of aesthetics, the Bosch FPE-1000-SLC showcases a modern design that seamlessly fits into any kitchen décor. Its stainless-steel finish is not only sleek but also durable and easy to maintain, making it a practical addition to your home.

Furthermore, safety is paramount, and Bosch has incorporated multiple safety features, including automatic shut-off and child lock capabilities, ensuring peace of mind for families with children.

In conclusion, the Bosch FPE-1000-SLC is a versatile, efficient, and stylish appliance that enhances the cooking experience in any home. With its advanced technologies, user-friendly interface, and commitment to quality, Bosch continues to set the standard for modern kitchen appliances. Whether you're a novice cook or a seasoned chef, the FPE-1000-SLC is sure to elevate your culinary creations to new heights.