Protecting the environment, Technical data

Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Protecting the environment

Z Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product zavailable for separate collection.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com

Technical data
		CD601 TYPE 3	CD602 TYPE 3
Input voltage	VAC	230	230
Power input	W	1,100	1,150
No-load speed	min-1	5,500	5,500
Max. depth of cut	mm	55	55
Blade diameter	mm	170	170
Blade bore	mm	16	16
Blade tip width	mm	2.6	2.6
Weight	kg	4.7	4.7

Level of sound pressure according to EN 60745:

Sound pressure (LpA) 93.5 dB(A), uncertainty (K) 3 dB(A)

Acoustic power (LWA) 104.5 dB(A), uncertainty (K) 3 dB(A)

Vibration total values (triax vector sum) according to EN 60745:

Vibration emission value (ah) 2.0 m/s2, uncertainty (K) 1.5 m/s2

EC declaration of conformity

MACHINERY%DIRECTIVE

CD601/CD602

Black & Decker declares that these products described under

"technical data" are in compliance with: 2006/42/EC, EN 60745-1, EN 60745-2-5

For more information, please contact Black & Decker at the

following address or refer to the back of the manual.

The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Black & Decker.

Kevin Hewitt

Vice-President Global Engineering

Black & Decker Europe, 210 Bath Road, Slough,

Berkshire, SL1 3YD

United Kingdom

04/10/2011