Black & Decker KS650K, 90557135 instruction manual Use, Hints for Optimum USE

Page 15

Fitting and removing the saw blade (fig. B and C)

 

 

Warning! Before attempting any of the following

 

operations, make sure that the tool is switched off and

 

unplugged and that the saw blade has stopped. Used saw

 

blades may be hot.

 

Fitting the saw blade (fig. B)

 

￿

Hold the saw blade (10) as shown, with the teeth facing

 

forward.

 

￿ Push and hold the blade clamp (11) down.

 

￿

Insert the shank of the saw blade into the blade holder

 

 

(12) as far as it will go.

 

￿ Release the blade clamp (11).

 

Saw blade storage (fig. C)

(4)

Saw blades (10) can be stored in the storage compartment

located on the side of the tool.

(4)

￿

Open the cover of the saw blade storage compartment

 

by holding the tab on the top of the cover and pulling it

 

 

outward.

 

￿ The blades are retained in the compartment by a

 

 

magnetic strip. To remove a blade, press down on one

 

 

end of the blade to raise the other end, and remove.

 

￿ Close the cover of the saw blade storage compartment

 

 

(4) and make sure that it is latched closed.

 

 

Warning! Close the storage compartment door securely

before operating the saw.

 

Connecting a vacuum cleaner to the tool (fig. D)

 

An adaptor (13) is required to connect a vacuum cleaner or

 

dust extractor to the tool.

 

￿

Push the adaptor (13) into the dust extraction outlet (6).

￿

Connect the vacuum cleaner hose(14) to the adaptor(13).

Cut line blower (fig. E)

 

￿

To aid visibility when cutting, your jigsaw is equipped with

 

a cut line blower (15) which will keep the work area clear

 

of dust as you saw.

 

USE

 

Adjusting the shoeplate for bevel cuts (fig. F and G)

 

Warning! Never use the tool when the shoe plate is loose

or removed.

 

The shoe plate (7) can be set to a left or right bevel angle of

up to 45°.

 

￿

Pull the shoe plate locking lever (5) outwards to unlock

 

 

the shoe plate (7) from the 0 deg position.

 

￿ Pull the shoe plate (7) forward and set the required bevel

 

15°, 30° and 45° indicated in the bevel angle window.

 

￿ Push the shoe plate locking lever (5) back towards the

 

 

saw to lock the shoe plate (7).

 

To reset the shoe plate (7) for straight cuts:

 

￿

Pull the shoe plate locking lever (5) outwards to unlock

15

 

 

 

the shoe plate (7).

ENGLISH

 

(7) to an angle of 0° and push the shoe

￿ Set the shoe plate

 

plate backwards.

 

￿ Push the shoe plate locking lever (5) back towards the

 

saw to lock the shoe plate (7).

Setting the pendulum stroke (fig. H)

￿

Set the pendulum stroke selector (9) to the required

 

position.

 

￿ Position 0: metal and aluminium and sheet metal.

￿

Position I: for laminates, hard wood, work tops.

￿

Position II: for plywood and PVC/Plastics.

￿

Position III: for soft wood and fast cutting.

Variable speed control

￿

Set the variable speed control knob (1) to the required

 

speed range.

 

￿ Use a high speed for wood, medium speed for aluminium

 

and PVC and low speed for metals other than aluminium.

Switching on and off

￿

To switch the tool on, press the on/off switch (2).

￿

To switch the tool off, release the on/off switch (2).

￿

For continuous operation, press the lock-on button (3)

 

and release the on/off switch (2).

￿ To switch the tool off when in continuous operation, press the on/off switch (2) and release it.

Sawing

Hold the tool firmly with both hands while cutting.

The shoe plate (7) should be held firmly against the material being cut. This will help prevent the saw from jumping, reduce vibration and minimise blade breakage.

￿ Let the blade run freely for a few seconds before starting the cut.

￿ Apply only a gentle pressure to the tool while performing the cut.

HINTS FOR OPTIMUM USE

Sawing laminates

When cutting laminates, splintering may occur which can damage the presentation surface. The most common saw blades cut on the upward stroke, therefore if the shoe plate is sitting on the presentation surface either use a saw blade that cuts on the downward stroke or:

￿ Use a fine-tooth saw blade. Saw from the back surface of the workpiece.

￿ To minimise splintering, clamp a piece of scrap wood or hardboard to both sides of the workpiece and saw through this sandwich.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Sierra Caladora de 600W Serra Tico Tico de 600W 600W Jig Saw FIG. a FIG. G Cuide el cable de alimentación. No lo utilice para Seguridad personalUso y cuidado de herramientas eléctricas Servicio técnicoEtiquetas sobre la herramienta Características MontajeUSO Consejos Para UN USO Óptimo MantenimientoProtección DEL Medio Ambiente Especificaciones DE ServicioSe for inevitável trabalhar com uma ferramenta Afastado de calor, óleo, pontas afiadas ou partesQuando trabalhar com uma ferramenta elétrica ao ar Livre, utilize um cabo de extensão apropriado paraOutra situação que possa afetar o funcionamento das Guardar ferramentas elétricas. Estas medidas deRepentina da ferramenta elétrica As ferramentas elétricas são perigosas se utilizadas porUtilização MontagemEspecificações ManutençãoProteção do Meio Ambiente Informações DE ServiçoKeep cutting tools sharp and cleanProperly. maintained General power tool safety warningsElectrical safety Personal safetyService FeaturesAssembly Additional features fig. aHints for Optimum USE USESawing metal MaintenanceService Information Specifications Protecting the Environment

90557135, KS650K specifications

The Black & Decker KS650K is a powerful and versatile jigsaw designed for both professional craftsmen and DIY enthusiasts. This tool stands out for its exceptional precision and ease of use, making it an excellent choice for a variety of cutting tasks.

One of the main features of the KS650K is its 650-watt motor, which delivers robust performance for cutting through various materials such as wood, metal, and plastic. The motor enables the jigsaw to achieve a cutting speed of up to 3000 strokes per minute, allowing for fast and efficient work. The stroke length is adjustable up to 20mm, providing versatility for different applications and materials.

Equipped with a variable speed control, the KS650K allows users to match the cutting speed to the material being cut. This feature is particularly beneficial when working with delicate materials, where precision is key. The integrated orbital action adds to its capabilities, giving the user the freedom to select the cutting action that best suits their project requirements. This dual-action helps to enhance the cutting efficiency, delivering cleaner cuts and minimizing splintering.

The KS650K also features a quick-release blade change system, which makes switching blades quick and hassle-free. This tool-free mechanism improves workflow efficiency, allowing users to focus on their projects without fumbling with complex blade installation processes. Additionally, the jigsaw comes with a set of various blades, catering to different cutting needs right out of the box.

Safety is paramount in power tools, and the KS650K does not disappoint. The jigsaw includes a safety trigger, ensuring that the tool cannot be activated accidentally. Furthermore, the rubberized grip handle provides comfort and better control during operation, reducing fatigue over extended periods of use.

Another significant characteristic of the KS650K is its lightweight design, weighing in at only 2.1 kg. This makes it easy to maneuver, especially in overhead cutting situations or when working in tight spaces. The compact dimensions of the jigsaw also allow for easy storage and transport.

In summary, the Black & Decker KS650K is a feature-rich jigsaw offering power, precision, and user-friendly design. From its robust motor to its variable speed controls and quick blade changes, this tool is well-suited for a wide array of cutting tasks, making it an essential addition to any workshop or toolbox. Whether you are a seasoned professional or a weekend DIY warrior, the KS650K delivers performance and reliability, setting the standard for jigsaws in its class.
Top Page Image Contents