Bosch Power Tools 4100DG-09 manual 2x2 Tooth Design

Page 34
• 14+18 2x2 tooth geometry covers multiple material thicknesses with one blade.
2x2 tooth geometry® (14+18 TPI) cuts 20% faster in metal on average than leading 18TPI competitor blades

Reciprocating Saw Blades

TECHNICAL BLADE ANATOMY

• TPI: Teeth per inch:

Tip

The lower the TPI, the faster the blade will cut. The higher the TPI, the cleaner the blade will cut.

Taper back

• Tilt angle:

The tilt angle is the angle at which the blade cuts into the material. A higher tilt degree produces a faster, more aggressive cut. Tilt angle is optimized based on application for best life to speed ratio.

• Gullet:

The space between each tooth that collects and clears out the material being cut. The deeper the gullet, the more efficiently the chips are cleared.

TPI

Non-taper

 

• Blade shapes:

Gullet

Taper blade bodies are designed for plunge cutting, curve cuts and easier starts in tough to reach applications. Non-taper bodies offer more stability and straighter cuts.

• Settings:

Blade tooth settings vary from one blade to another to optimize cutting efficiency by material applications.

Tilt angle

• Body thickness:

Thinner blades offer faster cutting and flexibility for flush cutting.

Thick kerfs offer straighter and more stable cutting.

Reinforced tooth

• Reinforced tooth:

A wide tooth base with a smaller gullet results in a stronger tooth design.

Clean for Heavy Metal

2X2

T o o t h

Geometry

18

®

14 18 14

2x2 Tooth Design

•Two alternating tooth pitch: Increases cutting speed in metal up to 20%

•Reinforced teeth: Up to 50% longer life against leading 18TPI competitor blades.

1" blade height and thicker body (.042) for straight cuts with less vibration

5º tilt angle for faster cuts and skid free starts

Speed for Heavy Metal

2X2

T o o t h

Geometry

®

Bigger pitch, bigger gullet

followed by a reinforced tooth to clear material (speed of cut)

Standard tooth

Reinforced tooth

2x2 Tooth Design:

Two alternating tooth pitch:

•Increases cutting speed in metal up to 20%

Combo teeth/reinforced teeth followed by aggressive tooth:

•Increase life by 2X in metal

•Combine speed and durability

1" blade height and thicker body (.042) for straight cuts with less vibration

5º tilt angle for faster cuts and skid free starts

Smaller pitch, smaller gullet

followed by an aggressive tooth to clear material (speed of cut)

2x2 tooth geometry® (8+10 TPI) cuts 20% faster in metal on average against leading competitor blades

•8+10 TPI 2x2 tooth geometry covers multiple material thicknesses with one blade

86

Boschtools.com

Toll Free:  877-BOSCH-99

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Saw & Benchtop 1587AVSK 1590EVSK1591EVSK Boschtools.com1584AVSK Jig Saws1587AVSP 1581AVSK1640VS JS51640VSK RS15 Reciprocating SawsRS10 Bend cord to insert Loop cord over hook Insert plug CS20CS10 15 Amp motor1656 Powerful 15 amp all ball-bearing motorCircular Saws 1677MDTWood 1677M5412L Blade in seconds4410L Miter Saws4212L 3912 44053918 DWM40LKT4B Table Saws 41004100-09 4100DG-09 TS2000DC010 TS1003TS1002 TS1004Dust Hood Vacuum Adapter VAC002 Suction Nozzle Fits Models 1584AVS, 1587AVSFits Models 1584AVS, 1587AV Fits Models 1581AVSFits Models 3912 Fits Models 4410, 4410L, 4412 and 5412LFits Model Fits Models 4412 and 5412LSide Set & Milled Side Set & Ground Wavy Set & Milled For superior speed and cleanlinessHCS For flexibility Use blades with tungsten carbide teeth to cut abraSpecial Laminate Fast and clean cuts through thick and thin woodJig Saw Blades Materials, so you don’t have to change blades mid-jobApplication Wood Fine, clean cuts Application Wood Cont’dApplication Metal Special Laminate Precise, clean cutsFine clean cuts in hard wood, Package Precise cuts, parallel cutsBreak resistant and durable Application Metal* Cont’dEconomical Straight cuts in pipes, profiles & sheet metalNon-ferrous metals AluminumFlexible for Stainless steel Soft materialsFine & straight cuts Fiberglass, ceramics and glass Fast, clean cutsSolid surface Thick and thin wood Fast and clean throughStraight, fine cuts Straight cuts, long life Straight, clean cuts, long lifeStraight, fine cuts, long life Fast cuts through thick Break resistantDurable Thin metalsFast curve cuts Fiberglass, ceramicsGlass File effect for fine straight or curved cutsItem # Also Available in U-Shank 5pc. Assortment Set Also Available in T-Shank 30pc. Woodworking SetAlso Available in U-Shank 3pc. Laminate Flooring Set Also Available in U-Shank 3pc. Assortment SetReciprocating Saw Blades Reciprocating Saw Blades2x2 Tooth Design Bi-Metal blade for long life. Available in 6 and 8 lengths Pair-setting optimized for fast cuts and long life in metalPlunge cutting Metal Demolition Reciprocating Saw Blade LineWood/Metal DemolitionHeavy Metal Heavy Use Reciprocating Saw Blade LineWood MetalClean Heavy Metal Heavy Use Reciprocating Saw Blade Line Cont’dDrywall Specialty Wood Standard Reciprocating Saw Blade LineWood PruningFor Wood with Nails Standard Reciprocating Saw Blade Line Cont’dFor ALL-PURPOSE Thin Materials IncludesHeavy-Duty Wood/Nails All-PurposeProfessional Series Circular Saw Blades Level Tension ringsLow vibration creates smooth as glass cut Pressure SoundItem # Diameter Teeth Arbor size Grind Type Hook Angle Item # Diameter Teeth Arbor sizeKerf Tools 10˚ 12˚132 174Item # Diameter Teeth ChipperThickness Plate Thickness KerfItem # Diameter Item # Diameter Teeth ArborPatented C-3 Dyanite Carbide Teeth Construction Series Circular Saw BladesHolds up to 2 blades Expansion SlotsItem # Blade Diameter Hook PlateMax Item # Diameter Teeth Application Arbor Angle Kerf Kerf Max. RPMHacksaw Frames and Blades Hacksaw Frame 15-1/2 L X 6-1/2 W X 1 HGrit Pack Qty Item #Pack Qty 44-7/8

4100DG-09 specifications

The Bosch Power Tools 4100DG-09 is a versatile and powerful table saw designed for both professional contractors and DIY enthusiasts. This model stands out in its category due to its robust construction, advanced features, and innovative technologies, making it a preferred choice for those who prioritize precision and performance in their woodworking tasks.

One of the standout features of the 4100DG-09 is its 10-inch diameter table saw blade, which delivers exceptional cutting capacity. The saw is powered by a 15-amp motor, providing ample power to handle tough materials with ease. The maximum cut capacity of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees allows users to perform a variety of cutting tasks, from ripping plywood to making beveled cuts.

The 4100DG-09 is equipped with Bosch's Gravity-Rise Stand, which features a unique design that allows for quick setup and takedown. This stand provides excellent stability and portability, making it easy to transport the saw to various job sites. The stand's adjustable height accommodates users of different sizes, ensuring comfort and efficiency while working.

Another notable feature is the onboard storage system, which keeps important accessories like the miter gauge, push stick, and power cord organized and easily accessible. This thoughtful design element helps users save time by preventing the hassle of searching for tools during projects.

Safety is paramount with the Bosch 4100DG-09. It includes a smart guard system, which features a riving knife and anti-kickback pawls for enhanced user protection. The riving knife maintains optimal alignment during cuts, preventing binding and kickback incidents that can lead to injuries.

In terms of technologies, the 4100DG-09 boasts an impressive soft start feature that gradually ramps up the motor's power, reducing initial strain on the saw and improving user control during the start-up phase. Additionally, its adjustable bevel settings make it easy to make precise angle cuts.

Combining durability, performance, and user-friendly features, the Bosch Power Tools 4100DG-09 is an exceptional choice for woodworkers looking to enhance their capabilities. Whether you are a seasoned professional or a hobbyist, this table saw offers the reliability and advanced technology needed to tackle any woodworking project with confidence.
Top Page Image Contents