SPECIFICATIONS
Electrical | 120 V~ / 60 Hz/9.5 A | |
Requirements | ||
| ||
Motor No Load Speed | ||
Maximum Cut Depth | 6 inches | |
Length of Stroke | ||
Blade Fastening | Twist Ring Quick | |
Release Chuck for 1/2” | ||
System | ||
Shank Blades | ||
| ||
Required Blade Type | 1/2” Shank | |
|
| |
| Metal Cutting : | |
Included Blades | x 5/8” x 20ga. 25 TPI | |
Wood Cutting: | ||
| ||
| x 3/4” x 18 ga. 11TPI | |
Base Plate | ||
Dimensions | 15 ga. Aluminum | |
Shoe Plate Tilt Range | 80° x 110° | |
Armature Bearings | (2) Fully Shielded | |
Radial Bearings | ||
| ||
Power Control | Trigger Switch with | |
|
E194601
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
List of contents
Part # | Description | Qty |
| Reciprocating Saw | 1 |
43 | Wood Cutting Blade | 1 |
43 | Metal Cutting Blade | 1 |
67 | Allen Key | 1 |
| Owner’s Manual | 1 |
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Assembly: Installing the Blade
1.Be sure the tool is unplugged from its power source. Wear heavy duty work gloves.
Shoe Plate (44)
Chuck (8)
| Set Screws (38) |
|
SKU 97580 | For technical questions, please call | REV 10b |
Page 9 |