Chicago Electric 93009 Unpacking, Installing and Adjusting Blades and Spacers

Page 7

Unpacking

When unpacking, check to make sure the following parts are included.

Concrete Wall Chaser with Two Blades and Spacers Steel Chisel Point 8-1/2” Long

Two Point Spanner Wrench

Side Mount Auxiliary Handle

5mm Hex Key

When unpacking, check to make sure that all listed accessories are included, and that the product is intact and undamaged.

WARNING! People with pacemakers should consult their physician(s) before using this product. Opera-

tion of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

Installing and Adjusting Blades and Spacers

1.Be sure the tool is turned OFF and is unplugged from its power source before installing or adjusting blades.

NOTE: The blades can be spaced from .3” to 1” (8 to 26 mm) apart for various width grooves in the work material, as desired.

2. Remove the Blade Guard Assembly (59) and

Depth Adjuster Handle (60) removed

Height Adjuster (58) by removing Screws (63 and

 

64) and Depth Adjuster Handle (60). Put these

 

parts in a safe place to prevent their loss. Swing

 

the Height Adjuster (58) down clear of the blade

 

and remove it.

 

Height Adjuster (58)

Screws (63 and 64)

Blade Guard Assembly (59)

Tool shown with Blade Guard Assembly (59) removed.

SKU 93009

For technical questions, please call 1-800-444-3353

Page 7

Image 7
Contents Concrete Slotting Saw Safety Warnings and Precautions SpecificationsSave This Manual Tool Use and Care Personal SafetySpecific Safety Rules ServiceGrounding Grounded Tools Tools with Three Prong Plugs Extension Cords Unpacking Installing and Adjusting Blades and SpacersSpindle Lock Operation Connecting a Dust Extraction HoseTroubleshooting MaintenancePart Description Qty Parts ListAssembly Drawing