Craftsman 137.21825 owner manual Adjustment Instructions, Blade Guard Assembly FIG. K, L, M

Page 12

BLADE GUARD ASSEMBLY (FIG. K, L, M)

1.Set the blade to maximum height and the tilt to zero

degrees on the bevel scale with the hand wheels. Lock the blade lock knob.

2.Place the external toothed lock washer (1) and a steel flat washer (2) onto the long hex. head bolt (3). Insert the bolt into the splitter bracket (4) as shown. (FIG. K)

Fig. K

Fig. M

anti-kickback

pawl

 

8

 

 

S-,tfl

I

I I I I / I I i

,/

3

ADJUSTMENT INSTRUCTIONS

3 2 1

3.Place the oval washer (5) on the pivot rod (6). (FIG. L)

4.Install the bracket assembly (4) into the rear of the saw table. Thread the bolt (3) into the internally threaded pivot rod.

NOTE: The splitter is removed from the illustration for clarity.

Fig. L

To avoid injury from an accidental start, make sure the switch is in the OFF position and the plug is not connected to the power source, before making any adjustments.

ADJUSTING THE TABLE EXTENSION (FIG. O)

NOTE: The table extension may be installed on the right side of the table, as needed, to support long

workpieces.

65

5.Position the blade guard arm (7) to the rear of the table. (FIG. M)

6.Using a straightedge, check that the blade guard splitter (8) is aligned with the saw blade (9).

7.If straightening adjustment is necessary, loosen the bolt (3) and shift the splitter assembly to the right or left, or rotate.

8.When the splitter is properly aligned with the saw blade, tighten the bolt.

NOTE: The splitter must always be correctly aligned so the cut workpiece will pass on either side without

binding or twisting to the side.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents E82443 Used 37J2Section General Safety Instructions Before Using the Table SAWAlways Wear EYE PROTECTION. Any tableSpecific Safety Instructions for the Table SAW Power Supply and Motor SpecificationsElectrical Requirements Never Perform ANY OperationGrounding Instructions Guidelines for Extension CordsEvent of a Malfunction or Breakdown Properly GroundedRecommended Accessories Unpacking and Checking ContentsUnpacking Your Table SAW Splitter Assembly Instructions LEG SET FIG. aSAW to LEG SET FIG. B Keeping the Area Clean FIG. D SAW Mountedto Other Work Surfaces FIG. CBlade Raising Handwheel FIG. E, F Attach the handwheel 1 to the elevation screw 2 atRIP Fence FIG. G Changing the Blade FIG. H, I, JAdjustment Instructions Blade Guard Assembly FIG. K, L, MAdjusting the Table Extension FIG. O Miter Gauge Adjustment FIG. P RIP Fence Adjustment FIG. QRIP Fence Indicator Adjustment FIG, Q Fig, OAdjusting the 90 and 45 Positive Stops Initial adjustment FIG.TStop Blade Tilt PointerFig. T Basic SAW Operations FkVg-IIl€ Ripping FIG.Y,ZKVlV/d,1II Using Wood Facing on the RIP Fence FIG. EE Mitering FIG. DDDado Cuts FIG. FF General Maintenance Maintaining Your Table SAWBlade Raising Andtilting Mechanism FIG. GG LubricationTroubleshooting Guide Symptom Possible Causes Corrective ActionSaw makes Unsatisfactory cuts 14212501 14903101Pan head screw 1496220132A Switch box Key PartSize Description135 Key Description Size Qty 161164 172155 Parts List for Schematic D ModelCraftsman Table SAW LEG Stand Craftsman 10 Table SAW Schematic D Model no83990291A1 Brush assembly 83871271Hex socket set screw Pan head tapping ScrewPage Page Tof Days a week SU-HOGAR 877

137.21825 specifications

The Craftsman 137.21825 is a versatile and dependable table saw designed to meet the needs of both amateur and professional woodworkers. Renowned for its stability and accuracy, this power tool is a staple in many workshops.

One of the standout features of the 137.21825 is its powerful 15-amp motor, which delivers plenty of cutting power to tackle various materials. This robust motor enables users to make smooth and precise cuts through hardwoods, softwoods, and even engineered materials. With a no-load speed of up to 5,000 RPM, the table saw is efficient in completing tasks quickly without sacrificing quality.

The saw features a 10-inch cast aluminum blade, providing a generous cutting capacity that accommodates a breadth of materials. The blade can be easily tilted for angle cuts, making it suitable for various joinery techniques. Additionally, the rack and pinion fence system offers easy adjustments, allowing users to achieve accurate cuts consistently. The fence is designed to be stable yet easily maneuverable, making setups and adjustments straightforward.

Safety is a paramount consideration in the design of the Craftsman 137.21825. It comes equipped with a blade guard and anti-kickback pawls that help prevent injuries during operation. Moreover, the saw includes an emergency switch that enhances the overall safety of the tool, enabling quick power cut-off in urgent situations.

Portability is another highlight. With a foldable stand and built-in wheels, this table saw can be easily transported from one job site to another or stored away when not in use. Its compact design does not compromise stability, ensuring that it remains firm during operation.

In terms of technology, the Craftsman 137.21825 integrates user-friendly features such as an adjustable bevel and clear measurement markings. The ergonomic design promotes comfort during extended periods of use, reducing fatigue and enhancing productivity.

Overall, the Craftsman 137.21825 embodies a blend of power, precision, and safety, tailored to meet the demands of various woodworking projects. Its thoughtful features and robust construction make it an excellent choice for anyone looking to enhance their woodworking toolkit.
Top Page Image Contents